Cut The Bellwire To Up Your Adsl Speed.
Thread Starter
Cut The Bellwire To Up Your Adsl Speed.
Was sent a link about an hour ago.
Bellwire and Broadband
No idea if it works as I haven't tried it yet.
Apologies if it's been posted before, I did a search but nothing apparent.
Anyone tried it? Does it work?
Ta.
Bellwire and Broadband
No idea if it works as I haven't tried it yet.
Apologies if it's been posted before, I did a search but nothing apparent.
Anyone tried it? Does it work?
Ta.
Official PPRuNe Chaplain
Join Date: Apr 2001
Location: Witnesham, Suffolk
Age: 80
Posts: 3,498
Likes: 0
Received 0 Likes
on
0 Posts
An interesting theory. Normally, the bell wire is in a twisted pair, and twisted round the other twisted paid in the cable - the signal pair. There shouldn't be that much RF pickup in that arrangement.
If I were going to bother, my inclination would be simply to disconnect the bell wire, since most instruments these days do their own thing off the primary pair anyway. But I've not tried it.
If I were going to bother, my inclination would be simply to disconnect the bell wire, since most instruments these days do their own thing off the primary pair anyway. But I've not tried it.
Join Date: Jun 2005
Location: Cheshire, UK
Posts: 160
Likes: 0
Received 0 Likes
on
0 Posts
I did it about a year ago and doubled my (somewhat slow) broadband speed.
BT say my line supports 256k to 512k, however I get just below 2m (out in the country you know).
As long as you have a micro filter on each extension, you do not require a bell wire because the filter has the capacitor required to generate the ringing signal (previously only in the main BT line box).
Many other countries use only a pair of wires but the legacy Post Office system and 'steam powered' telephones in the UK required the use of a bell wire.
Give it a go, what have you got to loose. Just remember to disconnect the bell wire at both ends, i.e. the line box and the extension box.
JsJ.
BT say my line supports 256k to 512k, however I get just below 2m (out in the country you know).
As long as you have a micro filter on each extension, you do not require a bell wire because the filter has the capacitor required to generate the ringing signal (previously only in the main BT line box).
Many other countries use only a pair of wires but the legacy Post Office system and 'steam powered' telephones in the UK required the use of a bell wire.
Give it a go, what have you got to loose. Just remember to disconnect the bell wire at both ends, i.e. the line box and the extension box.
JsJ.
Along with the above, I suggest you collar a BT engineer and ask him for a primary wall socket with built in filter. No need to fit any filters on any of the other sockets. Also, if you're with BT and recently had broadband from them, and you live a distance from the exchange, check they haven't capped you at 512. They restrict it without you knowing. The engineer check will find this or phone and ask, and only the engineer coming out to your property seems to be the way to get the muppets to remove it. I wasn't even aware it was capped at 512. Anyway, once they cleared this cap, I got up to 5M initially but now run somewhere around the 4Mb mark. A big improvement. BT are sh*t!!! Their customer service is appaling. They treat you like dirt. Indian call entre is a joke. Same script, different day. As I say, broadband problems, get te engineer out, it saves so much hassle in the long run.
Official PPRuNe Chaplain
Join Date: Apr 2001
Location: Witnesham, Suffolk
Age: 80
Posts: 3,498
Likes: 0
Received 0 Likes
on
0 Posts
Not that I know for sure - I don't call out the BT bloke. I've never had my lines capped like that - they go slower, and faster, depending on the weather. The new modem settled down at the new higher speed within a week or so.
Join Date: Aug 2002
Location: Earth
Posts: 3,663
Likes: 0
Received 0 Likes
on
0 Posts
Anyone tried it? Does it work?
Broadband is a consumer quality service that is contended and has practically no guarantees in terms of speed you are likely to get (or anything else for that matter).
I just don't understand people who spend money on expensive filters, gold plated cables or whatever.....
For most people it's just a placebo effect, with only one or two exceptions (e.g. people in desperate situations who would normally be considered as being too far from their exchange).
Join Date: Dec 2000
Location: Horsham, England, UK. ---o--O--o---
Posts: 1,185
Received 4 Likes
on
2 Posts
I disconnected the two unnecessary wires rather than cut them!
It made only a very slight difference to my connection speed. However, my brother saw an immediate improvement of around 1.5mb per sec.
So it may help some people, depending on how noisy their BT wiring is.
It made only a very slight difference to my connection speed. However, my brother saw an immediate improvement of around 1.5mb per sec.
So it may help some people, depending on how noisy their BT wiring is.
Per Ardua ad Astraeus
Join Date: Mar 2000
Location: UK
Posts: 18,579
Likes: 0
Received 0 Likes
on
0 Posts
£10.90 on Ebay delivered. NB You need a BT NTE5 master socket for it to work. 'Duplicates' the bell-wire removal as ST says, so a screwdriver is cheaper.
Also bought an Iplate and fitted it.
Pre Iplate, download speed was checked at 1.4 max going down to .7 at times. Post Iplate, download speeds checked at or about 1.9, so, something like a 33% increase. Subjectively, it doesn't seem any faster and I still have the constant dropouts,freezes etc. but it would seem to have some sort of improvement effect. Would that one could fit a similar adaptor to Orange and their awful 'service'.
Pre Iplate, download speed was checked at 1.4 max going down to .7 at times. Post Iplate, download speeds checked at or about 1.9, so, something like a 33% increase. Subjectively, it doesn't seem any faster and I still have the constant dropouts,freezes etc. but it would seem to have some sort of improvement effect. Would that one could fit a similar adaptor to Orange and their awful 'service'.
