Wikiposts
Search

Notices
Computer/Internet Issues & Troubleshooting Anyone with questions about the terribly complex world of computers or the internet should try here. NOT FOR REPORTING ISSUES WITH PPRuNe FORUMS! Please use the subforum "PPRuNe Problems or Queries."

My Trusty Epson Photo 925

Thread Tools
 
Search this Thread
 
Old 18th September 2008 | 15:44
  #1 (permalink)  
Thread Starter
 
Joined: Jul 2001
Posts: 805
Likes: 0
From: U.K.
My Trusty Epson Photo 925

I have owned this, my main printer for a fair few years. It has always done a good job, rarely lets me down, alternative ink cartridges are dirt cheap and work very well.
I was thus a bit annoyed a month or three ago when, on trying to print out a boarding pass for a friend from his airline's website, the printer locked up and the error code indicated a visit to an Epson service centre was necessary. Further research indicated that it considered its waste ink reservoir to be full after years of cleaning and nozzle charging, thus I was obliged to visit a service centre to have this cleaned out - and the printer reset. (Probable cost two to three times that of a new printer.)
More research indicated that I had a small piece of software on my computer which would reset the printer, so I ran it and bingo! my printer was working beautifully again, but I was mindful that this reservoir was full and would need emptying.
I managed to download the GA drawings of the printer and these did not seem to indicate that the replacement job was easy, so I put it on a back burner for a while. Last night, some paper got jammed and on clearing it out a couple of spring loaded roller assemblies flew out as well which would have to be replaced before the printer would work again. As it had to be done immediately, I got out my toolkit and disconnected the printer. I turned it upside down, mindful of the waste ink that might pour out. It didnt! Then I noted a rectangular plastic structure secured to the bottom of the printer by one screw. I undid the screw and discovered that I had relased the waste ink reservoir. The absorbent material it contained was clean fresh white and little if any ink had had to be absorbed from the spout connecting it to the base of the print heads in the parked position!
Refitting the little rollers was another story, but I am writing this tale as it may help other Epson owners who have the same problem with the printer locking up for this reason and require re-setting. At the Epson service centre changing the waste ink reservoir is money for old rope!

My trusty Photo 925 is back in service once more.

P.P.
P.Pilcher is offline  
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.