computer not recognising drives
Thread Starter
Just Binos
Joined: Oct 2000
Posts: 1,397
Likes: 0
From: Mackay, Australia
computer not recognising drives
I have a friend whose computer has suddenly stopped recognising her CD drives. It's a Celeron 600 desktop running W98 SE. It has a CDROM and a CD-RW drive, but suddenly neither My Computer nor device manager betrays a hint of seeing they exist. On the law of averages a simultaneous double failure seems unlikely, as does the possibiity of cables, leads etc falling out simultaneously. Is there something obvious I should check before I go poking around inside?
Ecce Homo! Loquitur...
Joined: Jul 2000
Aviation Qualifications: Spotter
Posts: 24,627
Likes: 7,331
From: Peripatetic
Check the BIOS to see if the motherboard can see the drives. If it can´t it is almost certainly either a cable fault. (I would have added a BIOS or battery fault, but that would have lost the HDD as well). If so, the two drives will probably be on the same cable. Reseat or replace.
If the BIOS can see the drives, but Windows cannot, it is a Windows fault. This is more difficult. There is no way to force Windows to see an IDE drive. They can vanish because of viruses, bad drivers, protection software such as Sony´s root kit. To be honest, if it is Windows, it usually ends up easier to reformat and reinstall the OS
If the BIOS can see the drives, but Windows cannot, it is a Windows fault. This is more difficult. There is no way to force Windows to see an IDE drive. They can vanish because of viruses, bad drivers, protection software such as Sony´s root kit. To be honest, if it is Windows, it usually ends up easier to reformat and reinstall the OS
Administrator
Joined: Mar 2001
Aviation Qualifications: PPL
Posts: 8,121
Likes: 686
From: Twickenham, home of rugby
cables, leads etc falling out simultaneously
SD
