Hard Disk Failure
Thread Starter
Join Date: Sep 2000
Location: Dublin, Ireland
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Hard Disk Failure
Hi
I have a Maxtor 4D040H2 IDE hard disk which has recently got
corrupted.
To recover the data, I had an empty external hard disk unit.
I plugged the IDE hard disk into the unit and then connected the unit to the USB2.0 bay.
Depending on where I put the jumper settings, I get different error messages - all which cause the computer to crash.
When I set the jumper to master, the USB drive is recognised, the
hard disk is recognised, but before it can map the disk as a drive,
either the blue screen of death appears or the system reboots.
Attaching it internally as a slave yields similiar results.
Anyone had this problem before ?
Tks
I have a Maxtor 4D040H2 IDE hard disk which has recently got
corrupted.
To recover the data, I had an empty external hard disk unit.
I plugged the IDE hard disk into the unit and then connected the unit to the USB2.0 bay.
Depending on where I put the jumper settings, I get different error messages - all which cause the computer to crash.
When I set the jumper to master, the USB drive is recognised, the
hard disk is recognised, but before it can map the disk as a drive,
either the blue screen of death appears or the system reboots.
Attaching it internally as a slave yields similiar results.
Anyone had this problem before ?
Tks