Notices
Computer/Internet Issues & Troubleshooting Anyone with questions about the terribly complex world of computers or the internet should try here. NOT FOR REPORTING ISSUES WITH PPRuNe FORUMS! Please use the subforum "PPRuNe Problems or Queries."

CD Writer Question

Old 27th September 2004 | 11:54
  #1 (permalink)  
Thread Starter
 
Joined: Feb 2003
Posts: 420
Likes: 0
From: Io
CD Writer Question

I have a relatively new pc (18 months) that has a CD Combi-drive CD-R CD-RW and DVD.

I have burnt several cds, but now when I try, the software keeps telling me to put a disk in the drive when it's already there? I am using the same batch of disks, so that can't be the problem. I have tried burning usingb a slower speed and again the same issue. The DVD works fine and the drive can be read opk, but I just can't get the thing to burn disks now.

I have tried using NERO software and also the Windows Media Player.

Any advice / suggestions greatly received.
Maxflyer is offline  
Old 27th September 2004 | 12:42
  #2 (permalink)  

Spicy Meatball
 
Joined: Jan 2004
Posts: 1,115
Likes: 0
From: Liverpool UK
Could be a hardware problem I think - perhaps try removing the drive and reinstalling it, see if that helps.

Maz
mazzy1026 is offline  
Old 27th September 2004 | 14:28
  #3 (permalink)  
slj
 
Joined: Mar 2001
Posts: 179
Likes: 0
From: UK
maxflyer

Have you installed SP2?

Doing that caused my CD and DVD to stop writing. Uninstalling SP2 and restoring the data to a date before SP2 resolved the problem.
slj is offline  
Old 29th September 2004 | 03:08
  #4 (permalink)  
The Oracle
 
Joined: Aug 2001
Posts: 2,902
Likes: 0
From: Naples, Florida U.S.A.
Maxflyer,

It would really help if you gave us specs on your Hardware, OS, and Media you are using.

Take Care,

Richard
Naples Air Center, Inc. is offline  
Old 29th September 2004 | 08:26
  #5 (permalink)  
Thread Starter
 
Joined: Feb 2003
Posts: 420
Likes: 0
From: Io
Richard,

PC Spec:

2.10 Ghz AMD Athlon
512MB RAM
XP Pro OS
CD R/W DVD Combo
Using Nero and Win Media Player for burning
I've also tried with and without SP2

Thanks
Maxflyer is offline  
Old 29th September 2004 | 16:44
  #6 (permalink)  
slj
 
Joined: Mar 2001
Posts: 179
Likes: 0
From: UK
Maxflyer

Have you considered restoring the system to a point where you last recaLL the CD/DVD worked properly.

It did the trick for me.
slj is offline  
Old 30th September 2004 | 00:52
  #7 (permalink)  
 
Joined: May 2002
Posts: 2,242
Likes: 0
From: Australia
I have a similar problem, can do anything, more or less, using Creator 5 Basic but try to burn any other way and it tells me I haven't put a disk in.

WinXP Pro

Pentuim4

Windows media, real Player.
BlueEagle is offline  
Old 2nd October 2004 | 20:20
  #8 (permalink)  

Keeping Danny in Sandwiches
25 Anniversary
 
Joined: May 1999
Posts: 1,295
Likes: 0
From: UK
I am having a similar problem with SP2 where I cannot write to a CD R using Microsoft software. I cannot find anything on the Microsoft website. Any thoughts; other than going restoring back to before SP2?
sky9 is offline  
Old 2nd October 2004 | 21:10
  #9 (permalink)  
Thread Starter
 
Joined: Feb 2003
Posts: 420
Likes: 0
From: Io
I tried with and without SP2 and got the same result. In the end I changed the CD/DVD combi for an older CD Writer I had. All worked fine, so it turned out to be a hardware fault after all. I think maybe a laser had given up!
Maxflyer is offline  
Old 2nd October 2004 | 22:43
  #10 (permalink)  
The Oracle
 
Joined: Aug 2001
Posts: 2,902
Likes: 0
From: Naples, Florida U.S.A.
Maxflyer,

When I asked for the specs, I meant all the hardware. Example which model, Vid Card, CDRW, Mobo, Sound Card, HD, etc. (Otherwise it makes it very hard to picture and research the hardware in your system.)

Have you tried different media? (Before we give up on the CDRW.)

Take Care,

Richard

P.S. If you have another comp, try a test in that comp to make sure. (If it is dead, this would be a great time to get a Dual Layer DVD Burner.)
Naples Air Center, Inc. is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.