registry file failure
Thread Starter
Joined: Jul 2004
Posts: 4
Likes: 0
From: stockton on tees
registry file failure
wonder if anyone can help with this problem?
A workmate of mine is running winxp, or was as on startup this message is displayed!
"stop:C0000218 (registry file failure)
The registry cannot load the hive (file):
\system root\system32\config\software or its log or alternate.
It is corrupt, absent, or not writable.
beginning dump of pysical memory, dump complete.
Contact your system administrator or tech support group for futher assistance."
Than's in advance lonsdale (nooluv)
A workmate of mine is running winxp, or was as on startup this message is displayed!
"stop:C0000218 (registry file failure)
The registry cannot load the hive (file):
\system root\system32\config\software or its log or alternate.
It is corrupt, absent, or not writable.
beginning dump of pysical memory, dump complete.
Contact your system administrator or tech support group for futher assistance."
Than's in advance lonsdale (nooluv)
The Oracle


Joined: Aug 2001
Posts: 2,902
Likes: 0
From: Naples, Florida U.S.A.
Nooluv,
Getting Check Disk to run sometimes will solve the problem.
Boot from the WinXP CD, then go into Recovery Console. Type from the C Prompt:
chkdsk drive /p /r
/p : Does an exhaustive check of the drive and corrects any errors.
/r : Locates bad sectors and recovers readable information.
If that does not work, you can always do a repair with the WinXP CD.
Take Care,
Richard
Getting Check Disk to run sometimes will solve the problem.
Boot from the WinXP CD, then go into Recovery Console. Type from the C Prompt:
chkdsk drive /p /r
/p : Does an exhaustive check of the drive and corrects any errors.
/r : Locates bad sectors and recovers readable information.
If that does not work, you can always do a repair with the WinXP CD.

Take Care,
Richard




