More Fee's for LFMN
Join Date: May 2010
Location: europe
Age: 67
Posts: 645
Likes: 0
Received 0 Likes
on
0 Posts
Please tell me also! At 70 euros per 15 mins for a GPU at LFMN I would expect it do do that, but quite how is a mystery!
I guess Cannes will soon be busier again.
Edit: London ****ty was a joke until they recently upped their game due to complaints vociferously voiced here. Perhaps the excessive charging of services, catering and handling at Nice should now be the target of our wrath? Only joined up action will bring about change.
I guess Cannes will soon be busier again.
Edit: London ****ty was a joke until they recently upped their game due to complaints vociferously voiced here. Perhaps the excessive charging of services, catering and handling at Nice should now be the target of our wrath? Only joined up action will bring about change.
Last edited by deefer dog; 19th Sep 2013 at 17:06.
Join Date: Jul 2004
Location: Never sure
Posts: 150
Likes: 0
Received 0 Likes
on
0 Posts
It really works
CL300 & GLF
You attach the huffer to the external air inlet and ask for 50psi. You already have the GPU connected for electricity. Now the plane works exactly as if you have the APU running. The aircon works as normal. When you engage start the air is redirected to the airstart and the aircon shuts down.
The book implies it works but is vague. I asked at all the recurrents and no one could answer the question. But after one week with a U/S APU, it became apparent that the aircon works just fine with air from the external airstart inlet. All you are doing is filling the main gantry with pressurised air just like the APU bleed.
You attach the huffer to the external air inlet and ask for 50psi. You already have the GPU connected for electricity. Now the plane works exactly as if you have the APU running. The aircon works as normal. When you engage start the air is redirected to the airstart and the aircon shuts down.
The book implies it works but is vague. I asked at all the recurrents and no one could answer the question. But after one week with a U/S APU, it became apparent that the aircon works just fine with air from the external airstart inlet. All you are doing is filling the main gantry with pressurised air just like the APU bleed.
Join Date: Jan 2004
Location: Far away from LA
Posts: 1,032
Likes: 0
Received 0 Likes
on
0 Posts
so you are running a diesel engine of an ASU in order to try to run the ACM of the A/C pack... hmm interesting, but the AirCon nozzles for ground A/C are low pressure high volume type with a hose that have a 15 inches diameter.. where do you stick it ? entry door ? baggage compartment ?
How do you redirect the flow to your cooling drawers ?
ASU, GPU....what else ? then you have a slot to meet... and how about your hydraulic tests ?
Kilo Apron at LFMN is a total failure on the operators side. IHMO
How do you redirect the flow to your cooling drawers ?
ASU, GPU....what else ? then you have a slot to meet... and how about your hydraulic tests ?
Kilo Apron at LFMN is a total failure on the operators side. IHMO
Last edited by CL300; 24th Sep 2013 at 06:05.
Join Date: Jul 2004
Location: Never sure
Posts: 150
Likes: 0
Received 0 Likes
on
0 Posts
Ok relax.
I did not say we sat with the ASU running to give us aircon. IF you attach the ASU to the external start inlet, (don't worry yourself about baggage doors etc) hey presto, the Aircon works.
I am not saying the LFMN idea is a good one.
So give me a break. I've shared a little nugget of information, free of charge take it or leave it.
I did not say we sat with the ASU running to give us aircon. IF you attach the ASU to the external start inlet, (don't worry yourself about baggage doors etc) hey presto, the Aircon works.
I am not saying the LFMN idea is a good one.
So give me a break. I've shared a little nugget of information, free of charge take it or leave it.
Last edited by Grum; 24th Sep 2013 at 09:19.
Join Date: Aug 2002
Location: Up north
Posts: 1,660
Likes: 0
Received 0 Likes
on
0 Posts
Passed through Nice the other day and was told by reliable sources that this entire idea could very well be scrapped. Apparently changes in airport management and now more bizjet friendly going forward. Wait and see I guess...
CP
CP