Biz Jet Cruise Altitude
Thread Starter
Join Date: Aug 2008
Location: Germany
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Biz Jet Cruise Altitude
Two questions for some University research:
1. What is an average Biz Jet Cruise altitude on ultra-long haul flights, say Transpacific or Transatlantic on AC types e.g. Falcon 7X, Gulfstream G550, Global X etc?
2. Are these cruise altitudes higher/lower then for ultra-long haul commercial flights on say a 747, 777, A340 etc?
Cheers
1. What is an average Biz Jet Cruise altitude on ultra-long haul flights, say Transpacific or Transatlantic on AC types e.g. Falcon 7X, Gulfstream G550, Global X etc?
2. Are these cruise altitudes higher/lower then for ultra-long haul commercial flights on say a 747, 777, A340 etc?
Cheers
Join Date: Sep 2011
Location: europe
Age: 49
Posts: 183
Likes: 0
Received 0 Likes
on
0 Posts
The corporate types you mention all have service ceilings that exceed those of the airline types, so the corporate types will generally cruise at higher levels.
The actual cruise level that any type elects to fly will be determined by a combination of the aircraft weight, ambient conditions and economic considerations related to time and fuel consumption. On a long range flights a continuous climb as weight reduced would be convenient, until descent of course. Since this is not practical "step climbs" are made.
The actual cruise level that any type elects to fly will be determined by a combination of the aircraft weight, ambient conditions and economic considerations related to time and fuel consumption. On a long range flights a continuous climb as weight reduced would be convenient, until descent of course. Since this is not practical "step climbs" are made.
Join Date: Apr 2008
Location: MCO (occasionally)
Posts: 387
Likes: 0
Received 0 Likes
on
0 Posts
In a 550, initially FL410 fully loaded , and we can go to 450 after 4-5 hours, and climb to 510 ten minutes after we request descent.
... (The last part was an attempt at humor)
.83 or .85 normally, and .80 for long haul over 12 hours
FR
... (The last part was an attempt at humor)
.83 or .85 normally, and .80 for long haul over 12 hours
FR
Join Date: Jul 2000
Location: London
Posts: 207
Likes: 0
Received 0 Likes
on
0 Posts
In the 550 I operate, we will always be in the 40's, looking for higher as soon as we can get the weights to optimum. Getting lighter at the end of flights we are often at FL470 and even FL 490 if we can. We can't legally go to FL 510 but even if we could, we would be on very little fuel.
We operate a Challenger 604 a Global Express 5000 and a Global Express XRS.
As mentioned above (in previous posts) for operational reasons a modern ultra performing biz jet can usually operate at higher altitudes when compared to the airliners.
The Challenger 604 is limited to FL410. Usually on long flights we will cruise it between FL370 and FL410.
On the Globals even if it is certified to FL510, the highest I have flown it so far was FL470. This altitude was used on a short flight (about 3 hours in length) for weather avoidance or on very long range flights like Beijing to Montreal (non-stop in 12 hours 15 minutes at a long range cruise of M0.83).
However this said, for passenger comfort and pilot fatigue we usually fly the Global no higher than FL410 (unless operationally needed) because at that flight level we have a cabin pressure of only 3600 feet which makes a big difference to both passengers and crew.
FYI, the 604's cabin pressure at FL410 is around 8000 feet (4400 feet higher than the Global's cabin)!
As mentioned above (in previous posts) for operational reasons a modern ultra performing biz jet can usually operate at higher altitudes when compared to the airliners.
The Challenger 604 is limited to FL410. Usually on long flights we will cruise it between FL370 and FL410.
On the Globals even if it is certified to FL510, the highest I have flown it so far was FL470. This altitude was used on a short flight (about 3 hours in length) for weather avoidance or on very long range flights like Beijing to Montreal (non-stop in 12 hours 15 minutes at a long range cruise of M0.83).
However this said, for passenger comfort and pilot fatigue we usually fly the Global no higher than FL410 (unless operationally needed) because at that flight level we have a cabin pressure of only 3600 feet which makes a big difference to both passengers and crew.
FYI, the 604's cabin pressure at FL410 is around 8000 feet (4400 feet higher than the Global's cabin)!
Thread Starter
Join Date: Aug 2008
Location: Germany
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Excellent, thank you for your help. So there are obviously many factors in choosing a cruise altitude: weight, range, weather, passenger comfort and pilot fatigue etc.
As per commercial airliners on ultra-long haul routes, their cruising altitude would be typically FL36? thus lower then business jets on the same route.
As per commercial airliners on ultra-long haul routes, their cruising altitude would be typically FL36? thus lower then business jets on the same route.
Join Date: Mar 2001
Location: I wouldn't know.
Posts: 4,498
Likes: 0
Received 0 Likes
on
0 Posts
Depending on load usually in the thirties when starting, later on up to FL430 shortly before top of descent. Of course all depending on type, route length, passenger and cargo load, winds etc. Keeping lower for passenger comfort due to lower cabin altitude is usually not a main topic in airline operation, it is mainly about optimum level flying.
Airlines are there to make money so optimized flights are the norm. I can't ever recall an airliner above FL410 (except the Concorde) and even FL410 is pushing it for most airliners.
Some business jets can fly higher because they are certified to higher altitudes but like you said, weight, weather, winds and fuel burn are all part of the equation to accomplish the mission.
Since airlines are looking at cost all the time it is normal for them to optimize their flight patterns (to cut cost and make revenue) where as corporate jets are usually owned by wealthy corporations or individuals that don't require their aircraft to bring in or make money for them. In that sense they can operate their aircrafts (if need be) at less than optimal efficiency and stay at lower altitudes for either comfort reasons like I mentioned before or to cruise at a higher Mach/True airspeed regardless of how much fuel is being burnt out the tail pipes.
Some business jets can fly higher because they are certified to higher altitudes but like you said, weight, weather, winds and fuel burn are all part of the equation to accomplish the mission.
Since airlines are looking at cost all the time it is normal for them to optimize their flight patterns (to cut cost and make revenue) where as corporate jets are usually owned by wealthy corporations or individuals that don't require their aircraft to bring in or make money for them. In that sense they can operate their aircrafts (if need be) at less than optimal efficiency and stay at lower altitudes for either comfort reasons like I mentioned before or to cruise at a higher Mach/True airspeed regardless of how much fuel is being burnt out the tail pipes.
Join Date: Dec 2000
Location: on the golf course (Covid permitting)
Posts: 2,131
Likes: 0
Received 0 Likes
on
0 Posts
I have taken a B747-400 up to FL430, just once, as it is very rare to have the circumstances condusive to enable it. Indeed, I don't recall going higher than FL400 or maybe FL410 ever before this one off.
It was coming back into LHR from JFK in 2009 on exiting the NAT system over Southern Ireland and they even coordinated a handover to London at that level rather than the usual FL330(?).
Anyway, I have the photo to prove it somewhere!
It was coming back into LHR from JFK in 2009 on exiting the NAT system over Southern Ireland and they even coordinated a handover to London at that level rather than the usual FL330(?).
Anyway, I have the photo to prove it somewhere!
Join Date: Oct 2006
Location: London
Posts: 423
Likes: 0
Received 0 Likes
on
0 Posts
Out of interest, what is the engineering reason bizjets are designed for typical optimum cruise in the mid 40s and airliners in the mid-high 30s?
The higher a jet goes the lower the specific fuel consumption? So higher is better. But, I guess the negatives for this are the airframe penalties for operating at a higher level (in terms of higher press. diff.) and relatively higher thrust engines to be able to achieve the climb. But then both these trade-offs seem to me to scale up and down across transport jets and bizjets? Is it that the bizjet operators prefer shorter runway capability, so the greater SL thrust has other benefits? Or is it wing related - something like a long slender wing optmised for very high levels is structurally too heavy if scaled up to airliner size? I don't know if there are certification issues with high levels that are more easily met in a smaller aircraft? I can't think what they might be, it feels like the smaller aircraft could depressurise much faster, so it's not "speed of pax accessing emergency oxygen" thing.
Sorry if this rambling question has misunderstood the technicalities!
The higher a jet goes the lower the specific fuel consumption? So higher is better. But, I guess the negatives for this are the airframe penalties for operating at a higher level (in terms of higher press. diff.) and relatively higher thrust engines to be able to achieve the climb. But then both these trade-offs seem to me to scale up and down across transport jets and bizjets? Is it that the bizjet operators prefer shorter runway capability, so the greater SL thrust has other benefits? Or is it wing related - something like a long slender wing optmised for very high levels is structurally too heavy if scaled up to airliner size? I don't know if there are certification issues with high levels that are more easily met in a smaller aircraft? I can't think what they might be, it feels like the smaller aircraft could depressurise much faster, so it's not "speed of pax accessing emergency oxygen" thing.
Sorry if this rambling question has misunderstood the technicalities!
Last edited by 421C; 25th Apr 2012 at 12:04.
Join Date: Apr 2002
Location: Bohol, Philippines
Posts: 150
Likes: 0
Received 0 Likes
on
0 Posts
I think another important factor is that many biz-jets are operated as private flights where the pilot oxygen requirements are less stringent. Whereas for example under Part 135 one pilot must be wearing an oxygen mask at all times above FL350.
If one pilot leaves the flight deck above FL250 the other pilot must be using the mask.
http://www.faa.gov/pilots/safety/pil..._Equipment.pdf
If one pilot leaves the flight deck above FL250 the other pilot must be using the mask.
http://www.faa.gov/pilots/safety/pil..._Equipment.pdf