CJ2 Proline 21
Thread Starter
Join Date: May 2007
Location: France
Age: 57
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
CJ2 Proline 21
Hi,
Has any one of you allready scanned in a .pdf these things:
--> CJ2 - Flight planning manual
--> Proline 21 - Users manual
Appreciate to get a downloadable files of that 2.
N.
Has any one of you allready scanned in a .pdf these things:
--> CJ2 - Flight planning manual
--> Proline 21 - Users manual
Appreciate to get a downloadable files of that 2.
N.
Join Date: Oct 2009
Location: St Gallen
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts
How to display DME distance on Proline 21
Flying with Proline 21 more than a year, digging though all the manuals, but I can figuere this problem:
When I fly with FMS as a major NAV source, is there any chance to display DME distane somewhere on a PFD or MFD? DME-H evidentlly works only when ILS or VOR is major NAV source.
When I fly with FMS as a major NAV source, is there any chance to display DME distane somewhere on a PFD or MFD? DME-H evidentlly works only when ILS or VOR is major NAV source.
Join Date: Jan 2006
Location: Australia
Posts: 81
Likes: 0
Received 0 Likes
on
0 Posts
Been flying a CJ2 for 5 years and the only way to display DME is to have NAV as the active nav selection.
If you only have a single DME then holding the DME will display it on both PFD's if both are selected to NAV.
In this machine there is a DME repeater under the PFD that displays either NAV1 or NAV2 DME but I guess it's an optional extra.
If you only have a single DME then holding the DME will display it on both PFD's if both are selected to NAV.
In this machine there is a DME repeater under the PFD that displays either NAV1 or NAV2 DME but I guess it's an optional extra.
Join Date: Aug 2006
Location: NE Europe
Age: 45
Posts: 104
Likes: 0
Received 0 Likes
on
0 Posts
In our Lear 60XR's we get DME readout in PFD following these steps:
In FMS, set AUTO tune ON;
On PFD, set BRG pointers to VOR1 / VOR2.
In bottom left corner on PFD, now it shows VOR1 / VOR2, ident and DME distance.
You can only set bearing to VOR, when autotune is enabled.
or..
On FMS set FIX to VOR, and got distance from FMS
In FMS, set AUTO tune ON;
On PFD, set BRG pointers to VOR1 / VOR2.
In bottom left corner on PFD, now it shows VOR1 / VOR2, ident and DME distance.
You can only set bearing to VOR, when autotune is enabled.
or..
On FMS set FIX to VOR, and got distance from FMS