Kiwi engineer sucked into engine: killed
Thread Starter
Kiwi engineer sucked into engine: killed
Join Date: Oct 2007
Location: gold coast QLD australia
Age: 86
Posts: 1,345
Likes: 0
Received 0 Likes
on
0 Posts
Absolutely shocking. Its happened before, the 737 is one of the culprits, as is the worst of all, the Sabre. There has been some terrible accidents with LAME"S in QF as well, the worst being a engineer being decapitated by a Connie, and another killed when a armed door was opened in a hangar, and no need to tell what happened next, but he was crushed against the scaffolding. A terrible and timely warning to all who walk the apron.
Join Date: May 2002
Location: Brisbane
Age: 77
Posts: 1,406
Likes: 0
Received 0 Likes
on
0 Posts
Deepest sympathies to all involved, especially the Family of the Engineer, but also all those involved. 
Timely reminder to stay as safe as possible out there around aircraft.
Timely reminder to stay as safe as possible out there around aircraft.
Join Date: Jul 2008
Location: south pacific vagrant
Posts: 1,334
Likes: 0
Received 0 Likes
on
0 Posts
Likewise.
Fyffe to put out something more this afternoon. NZ media are reporting it as a C130 engine on a test stand.
Man killed in plane engine testing accident | Stuff.co.nz
Fyffe to put out something more this afternoon. NZ media are reporting it as a C130 engine on a test stand.
Man killed in plane engine testing accident | Stuff.co.nz
Join Date: Nov 2004
Location: Perth - Western Australia
Age: 75
Posts: 1,805
Likes: 0
Received 0 Likes
on
0 Posts
I do not have precise details of the accident, but I'm a loss to understand why there isn't a safety mesh grid of some kind between personnel, and a engine being tested under power, in a test facility?
My sympathies go to the engineers family and his co-workers.
My sympathies go to the engineers family and his co-workers.
Man sucked into NZ plane engine
This report claims 'it is thought he entered the safety enclosure while the engine was running'
But the source of this 'thought' is not identified.
This report claims 'it is thought he entered the safety enclosure while the engine was running'
But the source of this 'thought' is not identified.
Join Date: Jun 2008
Location: here
Posts: 167
Likes: 0
Received 0 Likes
on
0 Posts
I do not have precise details of the accident, but I'm a loss to understand why there isn't a safety mesh grid of some kind between personnel, and a engine being tested under power, in a test facility?
However it is always a sad day when someone doesn't get to go home..
Join Date: Nov 2004
Location: Perth - Western Australia
Age: 75
Posts: 1,805
Likes: 0
Received 0 Likes
on
0 Posts
The greatest safety line ever contantly drilled into me, and which is in the front page of virtually every machinery service manual, is.... "Never attempt to adjust, repair, or lubricate any machine or engine, that is in motion".
I do understand that there is occasionally a need to adjust a running engine. However, this must always be done with the recognition that you're playing with fire, by doing so.
If the test system involves the possibility of placing oneself at serious risk by carrying out those adjustments, then surely, the test procedures must be revised to reduce the personal injury risk to as low a level as possible.
I do understand that there is occasionally a need to adjust a running engine. However, this must always be done with the recognition that you're playing with fire, by doing so.
If the test system involves the possibility of placing oneself at serious risk by carrying out those adjustments, then surely, the test procedures must be revised to reduce the personal injury risk to as low a level as possible.
Last edited by onetrack; 8th Aug 2011 at 11:45. Reason: sp...
Join Date: Jul 2006
Location: In the bone yard.
Posts: 207
Likes: 0
Received 0 Likes
on
0 Posts
Correct 1me, although sometimes familiarity can breed contempt and engineers can get bitten by a 'routine' action which they have performed many times.
Some engines can only be manually trimmed and the most expedient way is to do it with said engine running, we used to do it that way every time on the P&W powered 707's.
Some engines can only be manually trimmed and the most expedient way is to do it with said engine running, we used to do it that way every time on the P&W powered 707's.
Deepest sympathy to the family and work mates from all of us.
This is the harshest reminder of the deadly environment we operate in day and night - take heed of this tragic event and be ever vigilant!
This is the harshest reminder of the deadly environment we operate in day and night - take heed of this tragic event and be ever vigilant!
Join Date: Feb 2009
Location: on the edge
Posts: 823
Likes: 0
Received 0 Likes
on
0 Posts
The greatest safety line ever contantly drilled into me, and which is in the front page of virtually every machinery service manual, is.... "Never attempt to adjust, repair, or lubricate any machine or engine, that is in motion".
We have no option than to adjust engines, track and balance propellers and rotors all whilst the thing is running and making large amounts of noise.
It is so fkcuing easy to have a lapse and the consequences are fatal.
RIP
