atc jobs abroad
Thread Starter
Join Date: Jun 2003
Location: UK
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
atc jobs abroad
Hello!
Would be grateful if anyone knows of any vacancies in Area Control or of any links to sites (for far/middle east, europe or america) if they could let me know...
ta
Would be grateful if anyone knows of any vacancies in Area Control or of any links to sites (for far/middle east, europe or america) if they could let me know...
ta
Join Date: Apr 2002
Location: England
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
Sonic
For Middle East try www.sercomerecruit.com
You will need a min of 5 years experience if you want to do Area radar over there (3 for Approach I think).
Hope that helps
For Middle East try www.sercomerecruit.com
You will need a min of 5 years experience if you want to do Area radar over there (3 for Approach I think).
Hope that helps
Join Date: Jul 2001
Location: Fort Worth ARTCC ZFW
Posts: 1,155
Likes: 0
Received 0 Likes
on
0 Posts
Need to get a macro for this <G>... You can discount getting an ATC job in the US unless you are a US citizen... Any rumor otherwise is just wishfull thinking by folks...
regards
Scott
regards
Scott
Join Date: Feb 2003
Location: Hurn....still
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
New Zealand recruitment
360,
I am soon to be starting my course @ Hurn and was doing a little investigation about where my future prospects could lie.
I got in touch with the guys who run the ATC in New Zealand and asked what the likelihood of being able to to work over there. The response I got was less than encouraging. First of all, they have no shortage of controllers, unlike most other countries it seems. Secondly, they run some sort of "bidding" system for the positions over there. This last bit made no sense to me whatsoever.
I started by looking on www.airways.co.nz and asked them. suggest you do the same if you want the complete low down.
Australia seemed a bit better.
Good Luck
I am soon to be starting my course @ Hurn and was doing a little investigation about where my future prospects could lie.
I got in touch with the guys who run the ATC in New Zealand and asked what the likelihood of being able to to work over there. The response I got was less than encouraging. First of all, they have no shortage of controllers, unlike most other countries it seems. Secondly, they run some sort of "bidding" system for the positions over there. This last bit made no sense to me whatsoever.
I started by looking on www.airways.co.nz and asked them. suggest you do the same if you want the complete low down.
Australia seemed a bit better.
Good Luck
Join Date: Sep 2002
Location: United Kingdom
Posts: 375
Likes: 0
Received 0 Likes
on
0 Posts
dannyo
Don't waste our time if all you want to do is scamper off. Oz won't take you (you need to be sponsored and even if they did start, you're at the back of a VERY LONG queue).
Don't waste our time if all you want to do is scamper off. Oz won't take you (you need to be sponsored and even if they did start, you're at the back of a VERY LONG queue).
Ohcirrej
Join Date: Feb 2003
Location: This is the internet FFS.........
Posts: 2,921
Likes: 0
Received 0 Likes
on
0 Posts
You in the college now Sonic, and looking elsewhere already?
Geeze, I thought I was going to cop some stick.......at least it's been 6 years.
And Dannyo......what P7 said. Advertising the fact you have intentions on beginning in the college is plain loco! You going to turn up at the unit if you complete the course, and tell them that you want to validate as fast as possible so you can get out?
Geeze, I thought I was going to cop some stick.......at least it's been 6 years.
And Dannyo......what P7 said. Advertising the fact you have intentions on beginning in the college is plain loco! You going to turn up at the unit if you complete the course, and tell them that you want to validate as fast as possible so you can get out?
Join Date: Jul 2002
Location: The frequency jungle
Posts: 975
Likes: 0
Received 0 Likes
on
0 Posts
Short Approach?
Arent you on the short list for South Africa?
Things must be getting bad in Denmark. Heard you guys are way overstaffed and that a few folks are getting the golden hand shake...
Good luck anyway.
Try www.navcanada.ca
Things must be getting bad in Denmark. Heard you guys are way overstaffed and that a few folks are getting the golden hand shake...
Good luck anyway.
Try www.navcanada.ca
Guest
Posts: n/a
Things must be getting bad in Denmark. Heard you guys are way overstaffed and that a few folks are getting the golden hand shake...
In total 395 souls, split 40/40/20% between controllers, assistants and engineers/techs
Needless to say the unions have started to dig in.
Join Date: Apr 2002
Location: world citizen
Posts: 146
Likes: 0
Received 0 Likes
on
0 Posts
126,7!
I was.
But it seems I was too specific in my demands to location. Apparently they still (one month before work force arrives) don't know exactly where they need people to work.
Very reassuring
I was.
But it seems I was too specific in my demands to location. Apparently they still (one month before work force arrives) don't know exactly where they need people to work.
Very reassuring
Join Date: Feb 2003
Location: Hurn....still
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
Steady on guys!
whoah there guys!!!
I first must point out that I have NO intention of sacking the UK the minute I finish my training! That is if I get through as you so rightly point out!!
My enquiries were on a purely "interested in whether qualifications were valid elsewhere in the world" basis. When I asked NZ, they responsded with all the gen on bidding for jobs etc...
All I was trying to do was to impart some knowlegde that I had gleaned to someone who was obviously interested. For crying out load, you probably know how to strangle someone, doesn't mean you're going to go out and do it tomorrow does it?
Geez! some people
Chill
I first must point out that I have NO intention of sacking the UK the minute I finish my training! That is if I get through as you so rightly point out!!
My enquiries were on a purely "interested in whether qualifications were valid elsewhere in the world" basis. When I asked NZ, they responsded with all the gen on bidding for jobs etc...
All I was trying to do was to impart some knowlegde that I had gleaned to someone who was obviously interested. For crying out load, you probably know how to strangle someone, doesn't mean you're going to go out and do it tomorrow does it?
Geez! some people
Chill
Ohcirrej
Join Date: Feb 2003
Location: This is the internet FFS.........
Posts: 2,921
Likes: 0
Received 0 Likes
on
0 Posts
Dannyo, you perhaps have to understand where some of these guys are coming from. I can tell you first hand that some people get p*ssed off at someone who they put all their hard work and effort into training, who's turns around 5 minutes later and says stuff you I'm outta here! (Stop pointing fingers P7, deep down I do have a conscience...........) And if it was known this was their intention from the start, then they get VERY p*ssed off. ATCO's are strange beasts.
Your analogy of knowing how to strangle somebody is a good one. You may feel like doing it on more than one occasion while at CATC (or whatever the hell they call it now), but good luck..................
Your analogy of knowing how to strangle somebody is a good one. You may feel like doing it on more than one occasion while at CATC (or whatever the hell they call it now), but good luck..................
Join Date: Feb 2003
Location: Hurn....still
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
See your point!
Jerricho
I see your point!
Just p****s me off when people go off on one without knowing the full SP! (Although maybe the same could be said for me)
I humbly apologise to anyone I may have offended by what I have said. Thay say "knowledge is power" but it can't half get you into trouble sometimes!
Yours, (watching what I say)
Dannyo
I see your point!
Just p****s me off when people go off on one without knowing the full SP! (Although maybe the same could be said for me)
I humbly apologise to anyone I may have offended by what I have said. Thay say "knowledge is power" but it can't half get you into trouble sometimes!
Yours, (watching what I say)
Dannyo