Go Back  PPRuNe Forums > Ground & Other Ops Forums > ATC Issues
Reload this Page >

One for USA controllers.

Wikiposts
Search
ATC Issues A place where pilots may enter the 'lions den' that is Air Traffic Control in complete safety and find out the answers to all those obscure topics which you always wanted to know the answer to but were afraid to ask.

One for USA controllers.

Thread Tools
 
Search this Thread
 
Old 12th May 2016, 10:36
  #21 (permalink)  
 
Join Date: Dec 2008
Location: SA
Age: 63
Posts: 2,308
Received 135 Likes on 98 Posts
Us airspace at night would be very similar to a lot of Aussie airspace during the day for workload purposes.
Dick, And this assessment is based on what? May I suggest you spend a few hours on a few different days over a few weeks in both Melbourne and Brisbane Centre, this may validate your claim.
sunnySA is offline  
Old 12th May 2016, 10:49
  #22 (permalink)  
 
Join Date: Oct 2010
Location: Melbourne
Age: 37
Posts: 49
Likes: 0
Received 0 Likes on 0 Posts
Us airspace at night would be very similar to a lot of Aussie airspace during the day for workload purposes.
My question was not one based on a workload comparison between USA and Aus but specifically on sector sizes, given that my sectors are larger than most FIRs.

Further, my question was one for USA ATCOs.
Kieran17 is online now  
Old 12th May 2016, 11:59
  #23 (permalink)  
 
Join Date: May 2009
Location: YMML
Posts: 1,838
Received 16 Likes on 6 Posts
And golly gosh, it's 10pm in the Australian Eastern states and there are still 150+. Roll on to 2am and even then there were 90+.

Last edited by le Pingouin; 12th May 2016 at 20:41. Reason: Additional data
le Pingouin is offline  
Old 12th May 2016, 20:01
  #24 (permalink)  
 
Join Date: Jun 2013
Location: Scotland
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Grizzled. Yes Canada has it sorted out. Large areas without radar coverage yet low level class E in many terminal areas. I have flown extensively both IFR and VFR studying the airspace in Canada and the USA.
Wrong!

Not one designated Terminal in Canada is Class E airspace.......

Low level Enroute sectors have absorbed airspace such as Saskatoon, Regina and Thunder Bay. They are controlled by Enroute controllers, using radar, not Terminal controllers.
InnerNinja is offline  
Old 8th Jun 2016, 02:42
  #25 (permalink)  
 
Join Date: Mar 2008
Location: USA
Age: 66
Posts: 50
Likes: 0
Received 0 Likes on 0 Posts
One more thing that we do (or did) in the US was take over terminal airspace that is not open 24 hours. We provided approach control services there in addition to our own terminal areas within our en route (area) sectors. And these sectors are combined and huge for US area sectors. (And still no approach rating.) I've been retired US ATC 8 years but I would bet they still do that.

I never minded, but others refused to ever vector for approach and would require the pilots to fly airways and transitions and entire approach procedures.
Vector361 is offline  
Old 1st Jul 2016, 19:08
  #26 (permalink)  
 
Join Date: Jun 2016
Location: USA
Posts: 5
Likes: 0
Received 0 Likes on 0 Posts
Yes, still very common for centers to take over approach control responsibility, generally after 2100-2200local when the approach control closes. Off-hand, it happens in parts of Oregon, Washington, central CA. That's in addition to the may more uncontrolled airports (or Class D with no associated approach control) for which the center always handles those duties.

Don't forget the center controllers who provide clearance delivery on the ground for aircraft awaiting to depart, too (obviously only works if there is an RCO nearby).
tower_controller is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.