Runway Vacated Report
I wanna tell you a story.
Vehicle on runway for bird scaring. Seen to vacate onto a taxiway about 2/3rd of way up runway and drive past the holding point. Aircraft already lined up cleared for takeoff.
Vehicle then does a 180, drives back past the holding point and re-enters the runway.
Driver's excuse was he hadn't reported runway vacated. NB: The 'air' frequency is re-broadcast on the vehicle ground frequency.
Vehicle on runway for bird scaring. Seen to vacate onto a taxiway about 2/3rd of way up runway and drive past the holding point. Aircraft already lined up cleared for takeoff.
Vehicle then does a 180, drives back past the holding point and re-enters the runway.
Driver's excuse was he hadn't reported runway vacated. NB: The 'air' frequency is re-broadcast on the vehicle ground frequency.
Implied blame on the driver being based on the fact that because he had left the runway, his clearance onto said runway had expired - very tenuous, particularly as obviously he had not had any further instruction, to hold or to proceed to a specified clearance limit. I would have thought that that is precisely what you might reasonably expect if the chap had not reported inspection complete or vacated and holding!
2 s
2 s
Join Date: Feb 2002
Location: Dubai
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
In my world anyone who crosses a runway or inspects it should be requested to call vacated.
I am still not sure why Mats Part I says otherwise in this day and age. I hope it is amended very soon.
there should be no ambiguity when runways are concerned and best practise world wide dictates that all crossings have a positive vacated call. EAPPRI has already issued guidance on this
I am still not sure why Mats Part I says otherwise in this day and age. I hope it is amended very soon.
there should be no ambiguity when runways are concerned and best practise world wide dictates that all crossings have a positive vacated call. EAPPRI has already issued guidance on this
Join Date: Aug 2012
Location: Midlands
Posts: 340
Likes: 0
Received 0 Likes
on
0 Posts
I and my fellow crew members will always call vacated, and where, whether its asked for or not.
If I'm on to scare birds I will add a positive "wildlife dispersed" to confirm the runway is safe. If its for a runway check I'll add "nothing to report" or "<X> reports when you are ready to copy" to indicate that there are either no problems or X number of problems (normally AGL fittings whose bulbs have gone)
At night I also have to ask for my onwards clearance and during the day it gives ATC an idea on roughly where I am as we are on own lookout.
There's also the added benefit that the Operations Co-ordinator monitors the air frequencies and will insert my inspections into the log when he hears me vacate.
Essentially its primarily a safety thing, to positively confirm that I am clear of the active runway and complete, secondary to that is the 'bolt on' report that the runway is confirmed as safe for use.
If I'm on to scare birds I will add a positive "wildlife dispersed" to confirm the runway is safe. If its for a runway check I'll add "nothing to report" or "<X> reports when you are ready to copy" to indicate that there are either no problems or X number of problems (normally AGL fittings whose bulbs have gone)
At night I also have to ask for my onwards clearance and during the day it gives ATC an idea on roughly where I am as we are on own lookout.
There's also the added benefit that the Operations Co-ordinator monitors the air frequencies and will insert my inspections into the log when he hears me vacate.
Essentially its primarily a safety thing, to positively confirm that I am clear of the active runway and complete, secondary to that is the 'bolt on' report that the runway is confirmed as safe for use.
Driver's excuse was he hadn't reported runway vacated.
2 s
I wasn't the tower controller concerned but the report was funnelled to me as I was the unit rep. on the NATS Communication Errors Working Group.
It was not my remit to investigate or pass judgement on communication errors, I merely reported them for discussion and for other unit reps to think 'yes that could happen at my unit'.
It was not my remit to investigate or pass judgement on communication errors, I merely reported them for discussion and for other unit reps to think 'yes that could happen at my unit'.
Join Date: Apr 2008
Location: scotland
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
You will be quoting "Best Practice" next
No it isn't a requirement and it's up to the controller to ask if he wants one. The controller sometimes doesn't want unnecessary comments on the RT when he has the vehicle in sight and it is just crossing but I would suggest, needs it if a vehicle is cleared on for an inspection.
No it isn't a requirement and it's up to the controller to ask if he wants one. The controller sometimes doesn't want unnecessary comments on the RT when he has the vehicle in sight and it is just crossing but I would suggest, needs it if a vehicle is cleared on for an inspection.
Nobodys
Well said, sir.
Chevvy
It seemed as if you were passing judgement by referring to the driver's report as an excuse. What was the aerodrome controller's excuse for not being sufficiently aware to foresee the potential problem?
2 s
Well said, sir.
Chevvy
It seemed as if you were passing judgement by referring to the driver's report as an excuse. What was the aerodrome controller's excuse for not being sufficiently aware to foresee the potential problem?
2 s
Join Date: Jan 2001
Location: Deepest darkest Inbredland....
Posts: 606
Likes: 0
Received 0 Likes
on
0 Posts
At my Aerodrome it is a local instruction for all vehicles to report vacated. Aircraft are not as they are visible on the ASMGCS, and we work on anticipated separation. Plus, given that some pilots report runway vacated when the nosewheel turns off the runway centreline, I think that that is a good idea especially when they do it in LVPs
Join Date: Feb 2004
Location: A galaxy far far away
Posts: 186
Likes: 0
Received 0 Likes
on
0 Posts
You will be quoting "Best Practice" next
Fair enough have robust procedures in LVPs, but vacation reports for all runway crossings? Why give the Tower Controllers big tall windows if we are going to be filling up the RT with unnecessary verbage?
Join Date: Sep 2008
Location: UK
Age: 38
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
Fair enough have robust procedures in LVPs, but vacation reports for all runway crossings? Why give the Tower Controllers big tall windows if we are going to be filling up the RT with unnecessary verbage?
I always had to report runway vacated when crossing a runway. Sometimes I'd have a controller ask me to "confirm you've vacated" or be told they'd seen me vacate - in these circumstances they'd be itching to get an aircraft away or issue a landing clearance so they'd have been watching me cross.
Join Date: Sep 2001
Location: South East
Age: 56
Posts: 614
Likes: 0
Received 0 Likes
on
0 Posts
I agree with Coolbeans.
Not all Airfield layouts are the same, some more complicated than others. Some VCR's have restricted views of the Runways and vacation points along them, some have perfect line of sight.
There is also the question of R/T loading (not all towers have split frequencies).
Ultimately if the appropriate risk assessments have been made then the MATS Pt 1 instructions are safe IMO.
If the ATCO doe's not require a Runway vacated message then why congest the frequency with one.
Not all Airfield layouts are the same, some more complicated than others. Some VCR's have restricted views of the Runways and vacation points along them, some have perfect line of sight.
There is also the question of R/T loading (not all towers have split frequencies).
Ultimately if the appropriate risk assessments have been made then the MATS Pt 1 instructions are safe IMO.
If the ATCO doe's not require a Runway vacated message then why congest the frequency with one.
Join Date: Jan 2001
Location: Deepest darkest Inbredland....
Posts: 606
Likes: 0
Received 0 Likes
on
0 Posts
Perhaps the runway vacated is to say that the vehicle has finished with the runway rather than for the ATCOs benefit. An example is a runway inspection where the vehicle is also inspecting the exits. A vacated call will show that he has finished completely rather than the ATCO assuming and the vehicle then turning around and re-entering the runway. So perhaps sometimes it might be a good idea.
Join Date: Jul 2004
Location: On the wireless...
Posts: 1,901
Likes: 0
Received 0 Likes
on
0 Posts
At Heathrow in the old days when we used proper strips and 'Checker' (or 'Seagull' for that matter') entered the runway for inspection (or whatever…) a blocking strip was displayed in the bay. The vehicle thus had 'procedural' occupancy of that runway whether it remained on, or was on/off/back on. Meanwhile it was time to do one's nails or sort out the EG list. It was hardly worth even watching the vehicle whizz on and off, and one should never assume anything anyway in aviation even based on visual observation. It was Checker's runway until such time a 'runway vacated' report was acknowledged at which time it reverted to the runway controller. Runway possession is that of the traffic cleared to use it, ie. whosever strip was in the bay. The ATCO merely manages runway occupancy. Not much different to a locomotive driver on a single rail line being in possession of 'the token' given to him by the signalman really…so why is all this so difficult?
Join Date: May 2005
Location: Leeds
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
There seems to be an awful lot of fluffing around the issue here. The airside driver must have an airside driving permit and vehicle RT certificate.
If he has crossed a holding point (his training would have taught him what this is) then he MUST NOT re-enter the runway without clearance.
It is of no relevance that the tower controller should have foreseen a potential problem (there is no requirement to) and there is also no requirement to report vacated. Having said that if a vehicle is cleared to operate on the runway it is good practice to report vacated but the fact that the tower controller saw him cross the holding point makes it perfectly acceptable to clear an aircraft to takeoff/land.
Grass roots fact is that the driver is at fault (it's a runway incursion). MOR it, accept it and learn from it.
If he has crossed a holding point (his training would have taught him what this is) then he MUST NOT re-enter the runway without clearance.
It is of no relevance that the tower controller should have foreseen a potential problem (there is no requirement to) and there is also no requirement to report vacated. Having said that if a vehicle is cleared to operate on the runway it is good practice to report vacated but the fact that the tower controller saw him cross the holding point makes it perfectly acceptable to clear an aircraft to takeoff/land.
Grass roots fact is that the driver is at fault (it's a runway incursion). MOR it, accept it and learn from it.
Join Date: Jun 2001
Location: Wherever someone will pay me to do fun stuff
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
There seems to be an awful lot of fluffing around the issue here.
The airside driver must have an airside driving permit and vehicle RT certificate.
If he has crossed a holding point (his training would have taught him what this is) then he MUST NOT re-enter the runway without clearance.
It is of no relevance that the tower controller should have foreseen a potential problem (there is no requirement to)....
....and there is also no requirement to report vacated.
Having said that if a vehicle is cleared to operate on the runway it is good practice to report vacated....
....but the fact that the tower controller saw him cross the holding point makes it perfectly acceptable to clear an aircraft to takeoff/land.
Grass roots fact is that the driver is at fault (it's a runway incursion). MOR it, accept it and learn from it.
A word of advice, go and look up a bit about TEM - it's a good principle in our business. Then take a bit of time to analyse your controlling techniques. Maybe listen to a few random periods from the tapes and see if you are making assumptions that may be incorrect. And think about how you could stop things going wrong if your assumptions are incorrect.
I do hope your post was intentionally provocative and designed to prompt discussion. It would be truly frightening if your comments truly reflect your thoughts.