Wikiposts
Search
ATC Issues A place where pilots may enter the 'lions den' that is Air Traffic Control in complete safety and find out the answers to all those obscure topics which you always wanted to know the answer to but were afraid to ask.

Question to ATCO

Thread Tools
 
Search this Thread
 
Old 20th Mar 2012, 10:17
  #21 (permalink)  
 
Join Date: Jul 2010
Location: USA
Posts: 563
Likes: 0
Received 0 Likes on 0 Posts
In the UK for the moment the computer at Swanwick assigns the SSR code according to the Uk SSR Code Assignment Plan. That plan is published in the UK Air Pilot ENR 1.6 available on line. In the not too distant future the code will be assigned by a computer in Europe.
I was flying a little Cessna around London a few years ago and noticed that for every controller I spoke to I had to reset my squawk code.

Consequently workload increased and I heard some poor read backs from others too, which decreased capacity.

In the US, France, Germany and Spain it is generally one code - one flight. Much more efficient and less workload.
soaringhigh650 is offline  
Old 20th Mar 2012, 11:59
  #22 (permalink)  
 
Join Date: Nov 2002
Location: meh
Posts: 674
Received 10 Likes on 7 Posts
New European AIC for Transponder failure coming out next month. Set 7800 and continue last ATC clearance.
Plazbot is offline  
Old 20th Mar 2012, 12:53
  #23 (permalink)  
 
Join Date: Nov 2005
Location: Wildest Surrey
Age: 75
Posts: 10,820
Received 97 Likes on 70 Posts
Soaringhigh: I don't see much hardship changing SSR code when you also have to change radio frequency. In any case, the 'cunning plan' means that controllers at each radar unit can tell which unit is working a particular aircraft and thereby can co-ordinate if necessary, and can see who to contact if the aircraft infringes controlled airspace.
chevvron is offline  
Old 20th Mar 2012, 13:35
  #24 (permalink)  
Spitoon
Guest
 
Posts: n/a
In any case, the 'cunning plan' means that controllers at each radar unit can tell which unit is working a particular aircraft and thereby can co-ordinate if necessary...
Which, of course, is only necessary because of the UK's rather quaint departures from (or interpretations of) SARPs and the somewhat fragmented and uncoordinated system that is used within the State. But I guess it must be the rest of the world that's doing wrong .
 
Old 20th Mar 2012, 15:50
  #25 (permalink)  
 
Join Date: Jul 2010
Location: USA
Posts: 563
Likes: 0
Received 0 Likes on 0 Posts
I don't see much hardship changing SSR code when you also have to change radio frequency
The xpdr doesn't always sit on the central radio stack. It is sometimes found beneath and to the right of the RHS yoke. Also if you happen to use one of these while hand flying the plane by yourself:



You'd be spending a good 20-30 seconds twisting those knobs to get the right number and maybe not looking out the window.

In many other countries it is not a problem as it is usually set once and we leave it there for the flight.
soaringhigh650 is offline  
Old 20th Mar 2012, 23:06
  #26 (permalink)  
 
Join Date: Nov 2005
Location: Wildest Surrey
Age: 75
Posts: 10,820
Received 97 Likes on 70 Posts
Strange that 'progress' seems to make things more difficult. I'm used to a transponder with a separate knob/thumbwheel for each of the four numbers; takes a lot less than 20 secs to change one of those, especially when one or more of the numbers may be 'common'.
chevvron is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.