Go Back  PPRuNe Forums > Ground & Other Ops Forums > ATC Issues
Reload this Page >

US qualifications transferable to the UK?

Wikiposts
Search
ATC Issues A place where pilots may enter the 'lions den' that is Air Traffic Control in complete safety and find out the answers to all those obscure topics which you always wanted to know the answer to but were afraid to ask.

US qualifications transferable to the UK?

Thread Tools
 
Search this Thread
 
Old 6th Jun 2011, 16:17
  #1 (permalink)  
Thread Starter
 
Join Date: Jun 2011
Location: Ireland
Age: 37
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
US qualifications transferable to the UK?

Hi guys I just graduated from an ATC-CTI school in America. I also have passed the ATSAT exam (the American FEAST test) and so now am waiting for a job offer from the FAA.

However working in the states is my back up option (especially since the current time from graduation to pick up is 2 years). I definitely want to be a controller in the UK if possible. I've been out of the NATs application process for about a year and a half now but I assume it is pretty much the same as when I last had a go.

Could graduating from one of the best ATC colleges in the US and having passed their version of the aptitude test allow me to have a different or shortened version of the standard NATs application process?

I recognize this is probably not the case but it's something I'm interested in having a look at. Can somebody suggest a specific person or department within the recruitment team of NATs that I could contact in relation to this?

Any help or thoughts are appreciated.
ZMP26 is offline  
Old 6th Jun 2011, 17:43
  #2 (permalink)  
 
Join Date: Oct 2000
Location: Berkshire, UK
Age: 79
Posts: 8,268
Likes: 0
Received 0 Likes on 0 Posts
I guess you know that salaries over here are dramatically lower than in the US and the cost of living is about twice what it is over there. Gasoline is twice what you pay, etc... Canada, Australia or New Zealand might be better bets?

Regarding ATC licencing. I don't know for sure but suspect you have to sit all the exams again... well, at least Air Law.

Good luck..
HEATHROW DIRECTOR is offline  
Old 6th Jun 2011, 17:54
  #3 (permalink)  
 
Join Date: Dec 1999
Location: LHR/EGLL
Age: 45
Posts: 4,392
Likes: 0
Received 0 Likes on 0 Posts
ZMP, without possessing a validated licence, i.e. actually qualified at a unit, I don't think NATS would entertain any short-cuts to of the process for you.
Gonzo is offline  
Old 6th Jun 2011, 18:26
  #4 (permalink)  
 
Join Date: Jun 2009
Location: UK
Posts: 143
Likes: 0
Received 0 Likes on 0 Posts
ZMP.
No shorcuts, whatever your current qualifications, you'd have to do all the UK CAA courses to work in the UK or the EEC.

Last edited by Danscowpie; 6th Jun 2011 at 19:28.
Danscowpie is offline  
Old 6th Jun 2011, 19:03
  #5 (permalink)  
 
Join Date: Aug 2010
Location: UK
Posts: 34
Likes: 0
Received 0 Likes on 0 Posts
When I was looking for a job with a UK Student License after finishing college in the UK, I spoke to NATS to ask the exact same thing. I was told I would have to apply just like everyone else so I very much doubt it...
SS10 is offline  
Old 6th Jun 2011, 20:54
  #6 (permalink)  
Thread Starter
 
Join Date: Jun 2011
Location: Ireland
Age: 37
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
I'm a dual citizen for both the UK and the US meaning I can do the job in both countries.

I know that in the past there was a different application process for those coming out of the services etc. Is that path still available and how would I go about making an application via that method if it was still around?
ZMP26 is offline  
Old 7th Jun 2011, 07:16
  #7 (permalink)  
 
Join Date: Oct 1999
Location: Anywhere
Posts: 2,212
Likes: 0
Received 0 Likes on 0 Posts
No - you can apply for the job in both countries. You've yet to prove whether you can "do" it.

The service application method was no different, previous experience was just taken into account during the selection process.
Chilli Monster is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.