Go Back  PPRuNe Forums > Ground & Other Ops Forums > ATC Issues
Reload this Page >

Brisbane Centre/Melbourne Centre ATC'ers....

Wikiposts
Search

Notices
ATC Issues A place where pilots may enter the 'lions den' that is Air Traffic Control in complete safety and find out the answers to all those obscure topics which you always wanted to know the answer to but were afraid to ask.

Brisbane Centre/Melbourne Centre ATC'ers....

Thread Tools
 
Search this Thread
 
Old 13th November 2005 | 08:46
  #1 (permalink)  
Thread Starter
 
Joined: May 2005
Posts: 81
Likes: 0
From: Australia
Brisbane Centre/Melbourne Centre ATC'ers....

G'day guys!!

Just wondering a couple of things....

Firstly, if we're on and IFR flight and outside of radar coverage, how do you guys keep an eye on us and what sort of information do you look at? Tis something i've never understood fully.

Secondly, say we're again IFR and flying through IMC where there are "ISOL CB 5000/30000" as per the area forecast, can you see the CB activity on your scopes and be able to vector us non-wx radar equipped aircraft around the bad stuff, ie. CBs? I hear theres a 10 min delay on what you see compared to whats actually happening, is that true?

Thanx guys!
planemad_bk is offline  
Old 13th November 2005 | 21:19
  #2 (permalink)  
 
Joined: Jan 2004
Posts: 561
Likes: 0
From: Brisbane, Australia
if we're on and IFR flight and outside of radar coverage, how do you guys keep an eye on us and what sort of information do you look at?
In TAAATS (The Aust. Advanced Air Traffic System) which is a Eurocat 2000 made by Thomson-CSF, we have workstations with 4 screens. A large ASD (Air situation dispay) in the centre, to the right a smaller secondary ASD, on the left a touch screen for intercom and frequency management, and also a AAARDS (cant remember what all the As stand for) that includes RAPIC (the Met Radar info from the Met office) as well as other info for the controller.

If you're out of radar coverage, as an IFR flight we have a square symbol with your label indicating this. Your position info in the first instance is computed by the ATC System using GRIB winds and flt pln info. The system is updated by the controller whenever you give ATC a position report.

can you see the CB activity on your scopes and be able to vector us non-wx radar equipped aircraft around the bad stuff,
Scopes, there's a word not often used these days. The RAPIC provides snapshots of the wx at tem minute intervals and is provided on a separate screen to the main and secondary ASDs. Hence we are unable to vector aircraft around wx. We can provide advice on the wx picture we recieve, but that's all.

for more info see this website.

http://www.airservicesaustralia.com/...banecentre.asp
DirtyPierre is offline  
Old 13th November 2005 | 22:13
  #3 (permalink)  
 
Joined: Aug 2002
Posts: 787
Likes: 0
From: On a Ship Near You
Our Wx feed is the same 'radar wx' you can get by logging into the BOM site. It's subtly different; but really it's the same; it is not 'overlayed' on the main screen, but is available on a seperate monitor; it is delayed and not accurate enough for aircraft wx avoidance.

It more or less gives us a concept of where aircraft are likely to divert. Although often when convection is commencing; aircraft divert and we have nothing (no piants at all) on this feed. I think this is because there is no 'rain' associated with the cloud which you still want to avoid.

On a bad day we have no reference points as the 'rain', blue, yellow, red bits paint on top of the map; so you can see red but have no idea where 'exactly' it is.

We work bigger and bigger sectors, some may have as many as 9 relevant radar feeds, so the maps and scale keeps changing; it's impossible to remember the geography associated with the feed.

I often ask a bigger palyer with wx radar to give me updates when requests are received by lower level aircraft; it's more accurate and more relevant.
SM4 Pirate is offline  
Old 14th November 2005 | 00:49
  #4 (permalink)  
 
Joined: Jan 2004
Posts: 561
Likes: 0
From: Brisbane, Australia
Further to what my colleague SM4 Pirate has said, the picture we get from the BOM paints rainfall.

The thinking being that the heavier the rainfall, the worst the turbulance/wx will be. This then means we aren't actually seeing where the cloud is as not all cloud produces rain. Hence aircraft may divert around cloud that our wx picture doesn't paint.
DirtyPierre is offline  
Old 15th November 2005 | 07:48
  #5 (permalink)  
 
Joined: Apr 2005
Posts: 229
Likes: 0
From: Bleak City
In other words the weather feed is effing useless!
En-Rooter is offline  
Old 16th November 2005 | 10:21
  #6 (permalink)  
 
Joined: Sep 2003
Posts: 12
Likes: 0
From: Orstralia
Useless... I think not!

Clearly the radar is not useless. I can see at a glance whether to phone the missus to put the guinea pigs under cover...
dickluvva is offline  
Old 16th November 2005 | 12:37
  #7 (permalink)  
 
Joined: Jan 2004
Posts: 561
Likes: 0
From: Brisbane, Australia
dickluvva, agreed. I use it to tell Mrs DP to get the washing in.
DirtyPierre is offline  
Old 27th November 2005 | 13:13
  #8 (permalink)  
Tweety
Guest
 
Posts: n/a
in a nutshell irrespective of the new hardware, you are still under procedural control when outside of radar coverage, once they get the ADSB full operative then it will be a different kettle of fish, we can probably then dispense with radar except for approach control.
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.