AMC3 CAT.OP.MPA.182 Fuel/energy scheme — aerodrome selection policy — aeroplanes

[JABBARA]

The page below is extracted from EASY ECCESS RULES FOR AIR OPERATIONS (DECEMBER 2022 EDITION)
Search trough all docs (Ops manuals of different airlines), DOC 9976 and all web queries do not give me a clear idea how to use it.
Particularly, I am not sure how to comment word "Applicable" (highlighted).
Is it only for wind or for entire weather changes after change indicator (e.g. BECMG, FM.... , TEMPO)?
Help please
Thanks


Note: The older version was GM2 CAT.OP.MPA.185 Planning minima for IFR flights — aeroplanes (OCTOBER 2019 EDITION)

https://cimg2.ibsrv.net/gimg/pprune.org-vbulletin/1280x2000/amc3_cat_op_mpa_182_fuelenergy_scheme_aerodrome_selection_po licy_aeroplanes_jpeg_a925926fe40896693c7f7fb20819964d5797659 1.jpg

[the_stranger]

Why would it only apply to wind limits?

As far as I understand, it is the entire weather forecast and if there are exceptions regarding wind, there are mentioned.

[JABBARA]

Thanks the_stranger
English is not my first language; this phrase extracted
".....initial part of the TAF should be fully applied, with the exception of mean wind and gusts that should be applied in accordance with the policy under column ‘BECMG AT and FM…’ in the table below"
is a little bit mind bending for me. Furthermore, at the following columns/ boxes, only Wind is emphasized
So I wanted to collect some comments from you fellows
:8