Setting MLW in OzRunways

[gchriste]

Hi all, just wondering if you can set MLW in OzRunways? I have been using AvPlan and you can set both MTOW and MLW per aircraft but I can’t see this in OZ. One,of the aircraft I fly has a reduced MLW.

[dartman2]

Yes you can. When you set up the performance data for an aircraft you can put in the corner points of the W&B envelope. This can include MTOW,MLW,MZFW etc.

[Two_dogs]

Or.... you could maybe go to the developer site?
https://docs.ozrunways.com/

[gchriste]

Gee thanks two_dogs. Not like that was the first thing i tried. :* given I couldn’t find anything obvious in the manual, and assuming surely there was a simple solution I was overlooking I posted on here. Thanks for dartman for posting what is in hindsight an obvious solution.

[Two_dogs]

Found it right here...
https://docs.ozrunways.com/ozrunways/8_aircraft.html (http://https://docs.ozrunways.com/ozrunways/8_aircraft.html)

https://cimg3.ibsrv.net/gimg/pprune.org-vbulletin/1557x1139/fig_aircraft_weight_balance_2_jpeg_2b12584712cbdbc0a8131826d 0366ff6b66d164a.jpg

[gchriste]

And what on there shows how to set a maximum landing weight as opposed to ramp weight restriction? You can see on the attached from AvPlan how both are displayed.

https://cimg7.ibsrv.net/gimg/pprune.org-vbulletin/1121x1293/png_image_1ea3d7d8eb2b790e1d4b3993583860f1f3f73713.png

[Head..er..wind]

AvPlan continues to impress. That data looks good and easy to understand