PDA

View Full Version : Runway Designation


Comms Monkey
5th Jan 2017, 12:00
This may be blindingly obvious but for some reason I cannot find the relevant reference, so.... :ugh:

Is it possible for someone to point me at the correct reference to an ICAO Doc/Annex or CAP which stipulates the relationship between a Runway's Designation and the Runway's magnetic bearing please?

All replies gratefully received. :ok:

Lafyar Cokov
5th Jan 2017, 20:18
http://www.icao.int/safety/implementation/library/manual%20aerodrome%20stds.pdf

5.2.2

Little One
6th Jan 2017, 08:23
Annex 14 Vol 1

Characteristics
5.2.2.4 A runway designation marking shall consist of a two-digit number and on parallel runways shall be supplemented with a letter. On a single runway, dual parallel runways and triple parallel runways the two-digit number shall be the whole number nearest the one-tenth of the magnetic North when viewed from the direction of approach. On four or more parallel runways, one set of adjacent runways shall be numbered to the nearest one-tenth magnetic azimuth and the other set of adjacent runways numbered to the next nearest one-tenth of the magnetic azimuth. When the above rule would give a single digit number, it shall be preceded by a zero.