PDA

View Full Version : on approach go directly to flaps 5 on 737ng


737ngpilot
4th Oct 2011, 01:36
Besides possible asymmetry at less than flaps 5 is there any other reason why one cannot skip flaps 1
Also the airspeed indicator indicate the flap position,where does it gets its info.

Sciolistes
4th Oct 2011, 04:01
Does the airspeed tape indicate the flap position? I thought it indicated the flap lever position?

Given then nature of flap 5, I imageine going direct would significantly increase the baloon effect. Never tried it and probably never will for the asym reason alone.

B737-pilot
4th Oct 2011, 05:06
I think is impossible due to the mechanical gate of the flap lever.

A37575
4th Oct 2011, 11:24
is there any other reason why one cannot skip flaps 1

You will get a few personal opinions but if you want facts then write directly to Boeing in Seattle. Include your recommendation and maybe Boeing will think it is a good idea.:rolleyes: Boeing would undoubtedly looked at that during initial test flying and come up with the current recommended procedure. Stick to that procedure and you have covered yourself.