PDA

View Full Version : Control yokes not aligned


Russells
27th Jul 2011, 12:00
Hi - In a picture of a 707 flight deck, the control yokes are in different directions:
Could this happen when the systems are switched off?

the pic is at:
Photos: Boeing 707-321 Aircraft Pictures | Airliners.net (http://www.airliners.net/photo/Pan-American-World/Boeing-707-321/1565349/&sid=ec1c1bab9db4c4cca2ba99095ab9d876)

R for Robert
28th Jul 2011, 21:17
Not sure about the 707, but in the VC10 if the controls become jammed there is a disconnect function between the control wheels.

One side controls the ailerons and the other the spoilers.
Therefore if the aileron control run jams, roll is controlled by the spoilers.

NukeHunt
28th Jul 2011, 21:58
If you read the text beneath the photo it states :-

Only the cockpit of N714PA (Clipper Golden Eagle) has been preserved.

So there is your answer. They are not connected to anything.

:ok:

Runaround Valve
29th Jul 2011, 07:48
The aileron control wheels are 'bussed' together by a cable and pulley system between them, underneath the floor. Obviously the cable has been removed or severed.