OEI Takoff procedure design

[Ops Tech Engr]

This is my first post in the forum and hope that all of you will share your knowledge.

I'm searching for a reference that provides me a full training material in designing one engine out takoff design. Can anybody help me.?

[dispatchshmoe]

A full training material, I dont know of one. There are some decent books have it as a topic. I would definitely try and get a hold of Boeings Jet Transport Performance Methods as it has a very good section on obstacle clearance max weights.

If you fly Boeing equipment, you should be able to get a copy from your carrier's Airline Support Engineer.

I have the Airbus Getting to Grips with Aircraft Performance, and it doesnt have nearly the info vs the Boeing JTPM.

[john_tullamarine]

Easiest solution is to get a flight manual and work through some examples.

There is nothing terribly difficult other than getting accurate obstacle data for the area of interest once past the regions published by the aerodrome operator.

You might also like to run some searches on Tech Log as there are numerous threads discussing the ins and outs of escape design.