Aerosim 737NG FMST [Archive]

Low-bypass

31st Mar 2011, 18:06

Hey Guys

Can anyone help with the start-up procedures for the 737NG FMST Aerosim a friend of mine installed it on my computer a while ago but i can't figured out the steps that leads to start-up abd take-off.Any help is much appreciated

Pugilistic Animus

31st Mar 2011, 18:43

Computer and internet issues will be a more helpful forum....

No Further comments:oh::E

MrHorgy

31st Mar 2011, 21:05

This isn't really the forum, but i'll summarise (mods delete if you think inappropriate).

You need bleed air + electrics. Start the APU, put it on line, then make sure the APU bleed air switch is on, and the packs are off. Turn the start switch on the overhead to GND, then when the N2 starts to rise, put the start lever to idle around 20-30% N2. That'll get you going.

Aerosoft normally do some excellent manuals, I suggest you read them!

Horgy