PDA

View Full Version : Major Airport Runway Dimensions?


Badmachine
16th Aug 2008, 22:34
Is there any reference info regarding the standard width or other dimensions of the runway of a typical major U.S. airport?

Thanx. :ok:

mmciau
16th Aug 2008, 23:05
This can be helpful


Mike


azworldairports.com Home Page (http://www.azworldairports.com/cfm/homepage.cfm)

I use this one

World Aeronautical Database (http://www.worldaerodata.com/)

Throttle Arms
17th Aug 2008, 14:35
There really is no standard width.

Runway dimensions are based on the critical aircraft (the largest aircraft that will regularly use the airport) This aircraft is used for the design of the airports and does not limit larger aircraft from operating there.

Most international airports have a runway 60m wide. Length is based on physical constraints and/or length required for the critical aircraft.

Typical runway lengths can vary from 6,000' to over 11,000. Smaller airports are usually 5,000' or less.

NutLoose
20th Aug 2008, 14:25
Will this do?

TBL 2-3-2
Number of Runway Threshold Stripes

Runway Width
Number of Stripes
60 feet (18 m)
4
75 feet (23 m)
6
100 feet (30 m)
8
150 feet (45 m)
12
200 feet (60 m)
16




From section 2 chapter 3 of Aeronautical Information Manual (http://www.faa.gov/airports_airtraffic/air_traffic/publications/ATpubs/AIM/) you will also find all the layout and marking requirements for all the paved areas.

For more visit the FAA website, link below

Airports & Air Traffic (http://www.faa.gov/airports_airtraffic/)