View Full Version : Robin DR400 Spar Mod / Inspection
Paul Bromley
27th May 2007, 16:33
Does anyone have any images of the spar mod being done or any related images of the factory kit and the finished underwing appearance ?
I would be grateful to see what is required before we decide where our aircraft is to go to have it done.
Thanks all.
deing
27th May 2007, 17:09
Have a look at
http://www.rar.be/index2.htm
and select current projects
Paul Bromley
27th May 2007, 18:21
Thanks very much I am looking for a place to take my aircraft to have this ridiculous mod done, looking at the photos shows how unecessary this is !
Best wishes
Paul
22/04
28th May 2007, 17:24
Not sure everyone has it done the way shown on the above Site.
We had an aircraft done by AKKI at Turweston (UK) and I beleive the fuseleage was separated from the wing and tipped to alow access. Don't remember such large repairs under the wing.
Red Chilli
28th May 2007, 22:55
Hi,
I'm about to buy into a DR400/160 group - is this a recent mod or an AD? Can I look forward to a large bill which has so far not been aired, or is this mod likely to have been done already?
Thanks
A and C
29th May 2007, 07:11
The current AD covering this is EASA 2007-0071 this superseeds EASA 2006-0347-E & DGAC F-2003-348.
Red Chilli
29th May 2007, 20:49
Thanks, the AD should have already have been done then I guess, as it's currently flying and recently (April) had its annual.
deing
31st May 2007, 09:25
The AD might not been done as there is a transitionperiod of several years depending upon the age of your aircraft