View Full Version : David Clark Model H10-76
Smurfjet
16th Jul 2004, 05:30
Hiya,
Does this model work on GA a/c, anyone try it and can comment on it?
http://www.davidclark.com/HeadsetPgs/h10-76.htm
Thanks
Flyin'Dutch'
16th Jul 2004, 05:37
The plug is likely to be a mil spec one rather than the usual twin jacks required on GA aircraft but you can get an adapter lead for that.
However I am pretty sure that you will have problems as the mike on that one is low impedance and you will need high impedance in GA.
FD
Pronto
16th Jul 2004, 11:35
You could get an adaptor for it from Headset Services Ltd at Shoreham Airport. The adaptor allows the use of mil spec headsets on a civ spec radio.
The relevant page is at: http://www.headsetservices.com/prod_hsl/hsl_converters.html
Be warned, they're a bit on the expensive side, but they're the only people I know who make these items.
NinjaBill
16th Jul 2004, 11:53
If DC13.4s weigh 13.4oz, then using the same logic, DC-10-76s will weigh about 1/3rd of a stone. I hope you have a strong neck.
soppybeagle
16th Jul 2004, 23:53
Just saw this...............
http://www.adamsdirect.co.uk/proddetail.asp?modelno=EMCC%20MKII%20TG
Didn't find what I was looking for!