PPRuNe Forums - View Single Post - TP 331 Question
Thread: TP 331 Question
View Single Post
Old 5th August 2017 | 08:06
  #10 (permalink)  
harpf
10 Anniversary
 
Joined: Aug 2011
Posts: 28
Likes: 0
From: Upsate NY
NTS

On the 331 after shop visit a test is required to check the NTS RPM. This done to ensure the engine windmills above 28%. The target is 32% as I recall. This done by shutting off the fuel and watching the the NTS set the prop pitch to an angle that result in 32%. NTS does not govern or controlled at any speed just puts the prop in compromise position. To reduce drag until the pilots secures the engine. The test is conducted at ~6000 MSL and 160 kts.

Last edited by harpf; 5th August 2017 at 08:12. Reason: Added test condition / fixed typo
harpf is offline  
Reply