PPRuNe Forums - View Single Post - Selecting low V/S for CDA
Thread: Selecting low V/S for CDA
View Single Post
Old 3rd September 2016 | 14:47
  #21 (permalink)  
misd-agin
 
Joined: Jan 2006
Posts: 2,205
Likes: 0
From: US
If you're far enough below the path/VTI you'll either level off, and break the required minimum (no level off) or could use v/s, or advance the throttles while in FLCH(Boeing), to shallow out the descent rate.
misd-agin is offline  
Reply
0