PPRuNe Forums - View Single Post - 737NG (800/900ER) off-route waypoint sequencing
Old 2nd Aug 2016, 21:52
  #1 (permalink)  
None
 
Join Date: Jul 2000
Location: West
Posts: 399
Likes: 0
Received 0 Likes on 0 Posts
737NG (800/900ER) off-route waypoint sequencing

Reference GOLD version 2, the 737 in cruise should see off-route waypoint sequencing within 21nm of the route (XTK ERROR less than 21nm). I could not duplicate this in the simulator (it did not work at 19nm XTK ERROR), and have not had the opportunity in the jet.

The scenario is a weather deviation using HDG SEL and not adjusting the active route (not executing an offset). Does anyone know the actual distance? If so, is there a source reference for this?

Here is the GOLD excerpt:

Boeing B737, B747-400, B747-8, B757, B767, B777, B787, MD90
Waypoint sequencing will only occur when the aircraft is within 21 NM of the aircraft active flight plan route (as modified by any parallel offset that may have been entered). Therefore ADS-C waypoint change event report and armed UM 130 REPORT PASSING message will not be transmitted automatically when the aircraft is outside these limits.
None is offline