@Nadar, AW009 and Birmingham,
By the number of fear mongering post, you guys/gals must be just petrified to sit in the back of any helicopter while being transported offshore (if you even go offshore.
It's just a 825 hour torque check!! If it was thought to be a design flaw where the bolts and securing "nuts" (nadar) underneath could not maintain adequate torque for some unknown reason then something would be done about it. Do you know how many checks take place within a 825 period on any helicopter ? ... A lot of them being torque checks! Would be a very scary world if we did not have torque checks and inspections. Cant remember the interval for the torque check of the S92 MGB bolts but it does have one. It also has a 150 hr frame inspection of the entire area surrounding the MGB mounting. The Jesus nut that is on most helicopters have a torque checks and believe it or not, a lot of time fail initially as the cones are setting.
Last edited by Satcomm; 1st Jun 2016 at 13:57.
Reason: Can't say everything I want to