PPRuNe Forums - View Single Post - Conversion to other SEPs (no differences)
Old 17th May 2016, 18:34
  #3 (permalink)  
foxmoth
 
Join Date: Dec 1999
Location: Oop North, UK
Posts: 3,076
Likes: 0
Received 0 Likes on 0 Posts
Depends a bit on the experience of the person, ideally with the experience here I would start with a differences brief - speeds, w&b etc. then send them out to sit in the cockpit for ten minutes or so just to sit and have a look, I would then go out and go through the cockpit with them before launching into the local area for a bit of gh - stalls, steep turns & pfl, this gives them a chance to get used to the aircraft before back in the circuit with a minimum of four circuits - normal, flapless, glide and short field (ideally with a stop go in there somewhere for a short field TO). This can be done in about 40 mins with someone who is good but low hour pilots will probably need a few more circuits.
foxmoth is offline