Citation2, if you already knew the answer and had made up your mind how to interpret the issue, why then ask the question here?
From AFM Normal Procedure Introduction:
"The procedures contained in this chapter have been established and are recommended by the aircraft manufacturer. Only particular operations which are considered useful to highlight are presented. The procedures which are considered to be "basic airmanship" are therefore not covered. When actions depend on a condition, a black dot (•) or a black square (■) identifies this condition. The black square is used when there is a choice between one or more conditions and only one is applicable. These procedures are approved by the Airworthiness Authorities as acceptable procedures for a convenient use of the aircraft. This approval does not prevent the operator from developing equivalent procedures provided these procedures are approved by appropriate operational authorities."
Cood luck with your takeoffs.
CP
Last edited by CaptainProp; 15th October 2015 at 15:08.
Reason: To add AFM reference