CAUTION: GENERIC EXAMPLE
Generic Installation
Adjustment.
(a)Adjust rod end bearing on rod.
(1) Hold rod end bearing in position.
(2) Hold fixed nut.
(3) Tighten nut against key washer.
(4) Ensure that rod end position has not been disturbed.
b. Check for proper thread engagement by attempting to insert wire in witness hole.
(1) If wire can be inserted in witness hole, thread engagement is not correct. Use wire.
(2) Check for correct parts and adjust push-pullrod during rigging procedure.
(3) If wire cannot be inserted in witness hole, thread engagement is correct.
(4) Lockwire nut to keywasher
(5). Use wire.
c. Inspect (QA).
d. Perform rig check on collective, directional,lateral, or longitudinal flight control system,as required.