VF,
That was all I'd received. However, I just checked Keycopter and found that O.R.I.O.N is directly accessible from there. The SDS in question is a 3-page PDF:
A. General
The “CONFIG” mode integrates the taking into account of the optional facilities, the possibility of changing the unit system (4) (SI or IMPERIAL) and the possibility of changing the altitude unit (5) (Meter, Feet).
This mode is activated only when the VEMD detects the "engine stop" status and both lanes are operational.
To access this mode:
-- "OFF1" and "OFF2" are pressed to switch off both VEMD lanes,
-- "SELECT" and "ENTER" are pressed simultaneously and held,
-- "OFF1" and "OFF2" are pressed to activate both calculation lanes,
B. Modification Logic Inherent to the Contents of Configuration Pages
The selection of a modifiable field or possible selection in a configuration page is made with the "SELECT" push button. The modifiable field or possible choice is then displayed in reverse video (2).
The contents of the selected field are modified with keys "+" and "-".
The contents of each configuration page are validated with the selection of the "VALID" field (7) (with the "SELECT" push button) and the "ENTER" key. This memorises the new configuration values acquired.
The non-validation of the contents of a configuration page proceeds with the selection of the "ABORT" field (6) (with the "SELECT" key) and the "ENTER" key.
The return to "FLIGHT" mode proceeds with the stoppage of both calculation lanes (pressing "OFF1" and "OFF2").
Hope this helps. If you need the PDF, PM me.
I/C