PPRuNe Forums - View Single Post - CAS to EAS
Thread: CAS to EAS
View Single Post
Old 24th Apr 2003, 21:19
  #5 (permalink)  
dexter256
I'm bigoted @rsehole. Ignore me.
 
Join Date: Aug 2002
Location: London
Posts: 31
Likes: 0
Received 0 Likes on 0 Posts
In conclusion of my findings I should first like to thank oxford blue for his post.

I should like to quote from The Standard Handbook for Aeronautical and Astronautical Engineers (McGraw-Hill 2002, ISBN 0071362290, Mark Davies [editor]) which I have found most resourceful.

"The EAS is the equivalent airspeed which the airplane would have at sea level (air density rho0) if it developed the same 'dynamic pressure' as it does at its TAS at the altitude concerned (air density rho.)

Thus, q = 1/2 rho0 V^2 = 1/2 rho V^2
Thus, Ve = rt[(rho/rho0)V] = rt(sigma V)

Eas is a very useful parameter for engineer analysis. However for flight operations reference is made to CAS.

CAS (Vc)

The Calibrated Airspeed - rarely referred to as Rectified Airspeed - is the airspeed reading on a Calibrated Airspeed indicator corrected to a Pitot Static system, that is assumed to be entirely free of error. It is common practice in aircraft operations to write KCAS (knots CAS.) A better representation of the reading of an airspeed indicator than that given above is provided by:

(pt/p) <compressible> = (1+ (y-1/2)M^2)^y/(y-1)
reference 10.68

which applies to compressible flow.

As the Pitot Static system provides a measurement of (Pt - P) this term will be isolated on the left-hand side of the equation, and noting that y = 1.4 and M = V/a the equation becomes:

(Pt - P) = p{[1+ 0.2(V/a)^2]^3.5 -1}
reference 10.69

The compressibility correction factor is negligibly small for operations below about 10,000 ft and 200 kts Vc.
A useful equation for converting Vc to Mach number, accouinting for compressibility correction is:

M = rt( 5 { [ 1/d { [ 1 + 0.2 (Vc/a0)^2]^3.5 -1 } +1 ]^1/3.5 -1 }
reference 10.72 (page.. 10.122)

Vc = Ve + DVc
| DVc | given by:
DVc = a0{ rt( 5 { [ d { [ 1+ 0.2M^2 ]^3.5 -1 } +1 ]^1/3.5 -1}) -M rt(d)}

end quote.

Further information can be obtained from AFFTC-TIH-99-01, Aircraft Performance Flight Testing, Edwards AFB. Available from http://www.jeminas.com/aviation/pdf/...ht_Testing.pdf

I hope this may serve to answer any future queries regarding this flavour of airspeed.
dexter256 is offline