PPRuNe Forums - View Single Post - 'Promise' On board RAID controllers
View Single Post
Old 20th April 2003 | 23:51
  #11 (permalink)  
PPRuNeUser0171
 
Joined: Apr 2002
Posts: 1
Likes: 0
Bengal,

Yes.

Setup two IDE disks comming off the same ribbon cable, These will be the RAID array.

have another disk coming off the OTHER IDE channel, This will be the O/S.

If I know the Mobo you are talking about there SHOULD be another set of IDE channels that are non-RAID, Check the mobo manual or makers website.

That will do it.

As for the thread going off topic - It happens!

Gary.
PPRuNeUser0171 is offline