Ixus 120 manual. Don't know if it will work for you........I could not take an "image" so I've put the text here. If you want the full pdf, e-mail me on pprune.
1. Dare stamp below.
2. Image resolution.....below that.
You can insert the shooting date and time in the lower right corner of an
image. Once inserted, however, they cannot be deleted. Be sure to check
beforehand that the date and time are correctly set (p. 19).
Choose [Date Stamp].
● Press the n button.
● Press the qr buttons to choose 4 tab,
and press the op buttons to choose
[Date Stamp].
Accept the setting.
● Press the qr buttons to choose [Date] or
[Date & Time].
● Press the n button again to accept
the setting.
[DATE] will appear on the screen.
Shoot.
The shooting date and time will be
recorded in the image's lower right corner.
● To restore to the original setting, choose
[Off] in Step 2.
• Use the DPOF print settings (p. 128) to print.
• Use the included software to print.
Refer to the Software Guide for details.
• Connect the camera to a printer to print.
Refer to the Personal Printing Guide for details.
2.You can choose from six recording pixels (image size) settings.
Choose the recording pixels.
● Press the m button and choose , then
press the m button again.
Change the recording pixels.
● Press the op buttons to choose an
option, then press the m button.
The setting you chose will display on the
screen.
You can choose from the following two levels of compression ratio (image
quality): (Fine), (Normal).
Choose the image quality.
● Press the m button and choose , then
press the m button again.
Change the compression ratio.
● Press the op buttons to choose an
option, then press the m button.
The setting you chose will display on the
screen.