PPRuNe Forums - View Single Post - Reno ILS 16R approach
View Single Post
Old 1st Jul 2013, 03:10
  #3 (permalink)  
B-HKD
 
Join Date: Jul 2007
Location: USA
Posts: 372
Likes: 0
Received 0 Likes on 0 Posts
You have two IAF's to start the approach on.

1. IAF being PYRAM which has NoPT (No procedure turn required), you start there while maintaining 8500' and head to intercept the ILS16R LOC/GS.

2. IAF being TAKLE on a 316° radial from FMG (117.9) you begin by overflying TAKLE (altitude is up to you/ATC) heading 344° for a minute or so while descending to 9000', then turn outbound heading 299° for another minute or so, and then turn inbound (to the left) heading 119° until finally intercepting the ILS 16R LOC/GS at 8500'.

Note: you are required to remain within 10nm of TAKLE during this procedure turn.

Last edited by B-HKD; 1st Jul 2013 at 03:12.
B-HKD is offline