FlywithPark, A4 and Luckyguy
What I could copy from Airbus document is below.
In CONF1+F:S speed could be close to VFE
IfFLAPS 0 selected above Flap auto retraction speed (210 Kts on this example):
PossibleVFE OVERSPEED warning if rapid aircraft acceleration
NoVFE structural limit exceedance.
Do not delay FLAPS 0 selection above S speed =>prevents possible momentary VFE OVERSPEED warning
Flap maneuvering speeds are not limitations:
Itis safe to fly between VLS and VMAX (VMO, VLE, VFE) :
The requiredaerodynamic margin is properly ensured
This is from Airbus. I hope this answers all doubts.
Last edited by vilas; 23rd Jun 2013 at 16:18.