PPRuNe Forums - View Single Post - FAA Grounds 787s
Thread: FAA Grounds 787s
View Single Post
Old 24th April 2013 | 21:54
  #1747 (permalink)  
FlightPathOBN
 
Joined: Mar 2011
Posts: 1,407
Likes: 0
From: engineer at large
Since it does not appear they are using washers, one would apply the torque value to the bolt, not the nut.
Last edited by FlightPathOBN; 24th April 2013 at 21:56.
FlightPathOBN is offline  
Reply
0