PPRuNe Forums - View Single Post - How to detect the approaching stall ?
View Single Post
Old 20th February 2003 | 10:35
  #10 (permalink)  
buster172
 
Joined: Jun 2001
Posts: 134
Likes: 0
From: UK
CBLong and Jetstream Rider, thank you very much for your replies.

I am growing increasingly concerned that the product I feel would really provide a complete system of protection and increase situational awareness for new pilots is not going to be possible in the time I have available.

CBLong I appreciate your thoughts and thanks for the link, I was hoping to avoid fitting any external components or altering the airframe in anyway as that would lead to certification issues, so the fact that the technologies I had proposed are not going to perform is a slightly worrying issue I now have to deal with!



I was aiming to create a product that could be installed much like a portable GPS.

Jetstream I think you have definitely hit the nail on the head! I am scratching my head trying to figure out how to get so much into this product so that it can cater for every eventuality. I have until the middle of April to have my final concept finalised, and start on my design report. There really is so little time.

I have some ideas concerning the visualisation of airspace and the environment we operate in and I understand the technologies to do it. Its been done on the ground already, albeit in research and I feel that its very relevant in today’s airspace. So perhaps I have to concentrate on that side and accept I cant, in the time given solve all the problems I would like to.

I suppose I’ll just have to be brutal and create a manageable project in the time given rather than trying to save the world!

Thanks everyone for your help,

Regards

Buster,
buster172 is offline