I'm gonna throw coupla definitions and values at the audience just for sake of understanding how the AFM data is derived:
Touchdown Zone. As referenced in the Air Traffic Rules and Procedures Service (ATP) Practical Test Standards Guide, the touchdown zone is defined as a point 500-3,000 feet beyond the runway threshold not to exceed the first one-third of the runway. This definition is not used in landing distance performance calculations. The touchdown zone for certification may be as short as the point where a 3.5 degrees glidepath passing 50 feet over the landing threshold, intercepts the runway surface, which is 820 feet past the landing threshold.
Landing distances determined during certification tests are aimed at demonstrating the shortest landing distances for a given airplane weight with a test pilot at the controls and are established with full awareness that operational rules for normal operations require the addition of factors to determine minimum operational field lengths. Flight test and data analysis techniques for determining landing distances can result in the use of high touchdown sink rates (as high as 8 feet per second) and approach angles of 3.5 degrees to minimize the airborne portion of the landing distance. Maximum manual braking, initiated as soon as possible after landing, is used in order to minimize the braking portion of the landing distance. Therefore, the landing distances determined under §§ 23.75 and 25.125 are much shorter than the landing distances achieved in normal operations.
Flare with 8 feet per second, really? nearly 500 ft/min think bout it for a sec.
Last edited by 9.G; 20th Oct 2012 at 18:49.