PPRuNe Forums - View Single Post - AOA stall warning indicator
View Single Post
Old 14th Sep 2012, 16:30
  #6 (permalink)  
Pilotage
 
Join Date: Apr 2003
Location: UK
Posts: 233
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Machinbird
That is looking at it with a 1 'g' airline mentality. The word 'slow' is a misnomer. The airspeed is likely quite OK for flight.

This is an aircraft that is maneuvered aggressively.
Stay out of the Red zone and you are flying.
If you pull it into the red zone and it begins to depart, push it forward until you are out of the red zone.
The cross hatch area tells you that you had better have this gage in your scan and to pull smoothly to avoid nasty surprises while maneuvering.
Well it was labelled 1.3Vs, but strictly just as Vs will always be at the same AoA so will 1.3Vs if you work through the maths.

So it still holds true at, say, 2g.

As of-course do your comments.

P
Pilotage is offline