34-10-02B ADR 2 Ident.: MO-34-10-00008928.0003001 / 17 SEP 10 Applicable to: ALL
FLIGHT PREPARATION/LIMITATIONS Maximum landing capability is CAT 3 SINGLE. DURING COCKPIT PREPARATION ‐ ADR 2 pb-sw.......................................................... ............................................................ .....OFF The F/CTL MAINTENANCE message is displayed on the STATUS SD page. ‐ AIR DATA SWITCHING selector.................................................... ......................................F/O 3 ‐ ADIRS/ADIRU/2/26VAC AND AOA (location 121VU N08 or N09) C/B...................................Pull AFTER ENGINE START ‐ Use the RCL pb-sw on the ECAM control panel, in order to recall the NAV ADR 2 FAULT alert. ‐ On the EWD, check that the ADR 2...OFF procedure is not displayed. FOR TAKEOFF Takeoff in CONF 1+F is not permitted. Note: When the ADR 2 pb-sw is set to OFF, and if the aircraft is in CONF 1+F, the SFCS n°2 Flap channel is unable to crosscheck the airspeed coming from the ADR 1 with the ADR 2 airspeed coming from the SFCS n°2 Slat channel. This may lead to an uncommanded flap retraction during the takeoff. As a consequence, takeoff in CONF 1+F is not permitted when the ADR 2 pb-sw is set to OFF.