PPRuNe Forums - View Single Post - Big Crash at Reno
Thread: Big Crash at Reno
View Single Post
Old 11th October 2011 | 03:06
  #337 (permalink)  
ClippedCub
 
Joined: Jun 2009
Posts: 131
Likes: 0
From: ATL
Another frame showing bent port HS due to plunging flutter if the frame isn't an optical illusion. The counterweights out at the tips would exacerbate this mode from the elevator pitch flutter, and/or an elevator twisting off the torque tube. The left one looks a little bent too.

http://www.wire-edm.com/temp/1.jpg
ClippedCub is offline  
Reply
0