PPRuNe Forums - View Single Post - Flex T/O & Speed Corrections
Thread: Flex T/O & Speed Corrections
View Single Post
Old 26th September 2011 | 07:18
  #5 (permalink)  
Aikon
 
Joined: Aug 2005
Posts: 37
Likes: 0
From: Malaysia
The reason is for FLEX TO, the less dense air (lower QNH) factor is compensated by a lower FLEX setting. Therefore there's no requirement to change the speed.

However, if you do a TOGA TO, then speed correction is required on QNH.
Aikon is offline  
Reply
0