PPRuNe Forums - View Single Post - New Jepps plates - a question?
View Single Post
Old 17th August 2011 | 18:13
  #9 (permalink)  
Non-PC Plod
 
Joined: Feb 2005
Posts: 673
Likes: 1
From: On the green bit near the blue wobbly stuff
No, and therein lies the problem - When the plate shows only a DA, and not an MDA, do we assume that the DA must be at least the same or higher than the MDA?
It would appear logical that way, if you dont descend below the DA until you are visual, you must be also above the MDA. However, I dont say anything which says in black and white that you can do this.
Non-PC Plod is offline  
Reply