Sure, your actual DA would have to be higher, but Jeppesen's DA can equal OCH for non-precision approaches:
According to EU-OPS requirements, all non-precision approaches shall be flown using the continuous descent final approach (CDFA) technique with decision altitude (height), and the missed approach shall be executed when reaching the DA(H) or the missed approach point (MAP), whichever occurs first. The lateral part of the missed approach procedure must be flown via the MAP unless stated otherwise in the procedure. Normally only CDFA minimums are shown. These are identified by the use of a DA(H). Jeppesen does not include an add-on when publishing a DA(H) for a CDFA non-precision approach. Non-CDFA minimums are shown in exceptional cases and identified by an MDA(H).
So basically, since there is no add-on in published DA, it can be the same as OCA, if OCA is higher than system minimum for relevant approach.