BEA Interim report #2, pg 27:
The RTLU was found in its place in the fin and disassembled. An examination
was performed at the manufacturer’s and showed that it would allow travel
of the rudder measured as 7.9° +/- 0.1°. As an example, at FL350, this travel is
obtained for Mach 0.8 +/- 0.004, corresponding to a CAS of 272 +/- 2 kt.
Suppose they used slats (thus enabling change of RTLU settings)
Question: The info obtainable on the RTLU would be (high probability) different or could be the 7.9° by "chance"? The RTLU mfr. had this info "from a memorized mechanical freeze" of a mechanical limiter? Or other method?