reference EU OPS 1.400
The touch-down zone RVR is always controlling. If reported and relevant, the mid point and stop end RVR are also controlling. The minimum RVR value for the mid-point is 125 m or the RVR required for the touch-down zone if less, and 75 m for the stop-end. For aeroplanes equipped with a roll-out guidance or control system, the minimum RVR value for the mid-point is 75 m.
Note. “Relevant”, in this context, means that part of the runway used during the high speed phase of the landing down to a speed of approximately 60 kt.
In other words here once again as long as you perform a manual rollout and being within high speed regime RVR 125 is what you're looking for. Once slowed down to 60 kts 75 is sufficient to vacate the runway.
